QMAIL+MH设计方案(7)
添加时间: 2007-10-12 15:59:31 作者: 邮件服务器教程 阅读次数:36 来源: http://www.d9soft.com
#!/bin/bash
# This is adapted Bernhard Hailers old script
LOCAL_NUMBER="91311234" # tel no. 091311234
REMOTE_NUMBER="0911123456" # ISP tel no.
LOCAL_IP="192.168.0.99" # I have dynamic IP so this will do
REMOTE_IP="195.112.123.11" # your ISPs gateway
DEVICE="ippp0"
SYSPATH="/sbin"
ISDNCTRL="$SYSPATH/isdnctrl"
case "$1" in
start）
# turn on isdn
insmod /lib/modules/2.0.33/net/slhc.o
insmod /lib/modules/2.0.33/misc/isdn.o
sleep 1
# load the hisax module
insmod /lib/modules/2.0.33/misc/hisax.o
id=Tel0 type=5 protocol=2 irq=10 io=0x300
echo "starting isdn4linux"
# global
$ISDNCTRL verbose 0
$ISDNCTRL addif $DEVICE # create new interface
$ISDNCTRL addphone $DEVICE in $REMOTE_NUMBER
$ISDNCTRL addphone $DEVICE out $REMOTE_NUMBER
$ISDNCTRL eaz $DEVICE $LOCAL_NUMBER
$ISDNCTRL l2_prot $DEVICE hdlc
$ISDNCTRL l3_prot $DEVICE trans
$ISDNCTRL encap $DEVICE syncppp
$ISDNCTRL huptimeout $DEVICE 300
$ISDNCTRL chargehup $DEVICE off
$ISDNCTRL secure $DEVICE on
$SYSPATH/ifconfig $DEVICE $LOCAL_IP pointopoint $REMOTE_IP metric 1
$SYSPATH/route add default $DEVICE
$SYSPATH/ipppd /dev/ippp0 file /etc/ppp/options.ipppd &
$SYSPATH/route del default
;;
stop）
#turn off isdn
rmmod hisax.o
sleep 1
rmmod isdn.o
rmmod slhc.o
echo "Shutting down isdn4linux"
$ISDNCTRL delif ippp0
;;
*）
echo "Usage: $0 (startstop）"
exit 1
;;
esac
上下文章:
上一篇文章: 用WebEasyMail架构Web邮件服务器(8) 下一篇文章: Qmail系统下防止滥用mail relay方案(3)
相关文章: