NT Workstation 4试题4
添加时间: 2007-4-8 1:00:31 作者: 微软认证参考 阅读次数:21 来源: http://www.d9soft.com
1. How do you print to a TCP/IP printer?
A. Host name and printer name
B. Hostname and IP address
C. Printer name and IP address
D. Printer name and Host name
Ans. C
2. How do you trap packets of TCP/IP?
A. Network Monitor
B. SNMP
C. TCP/IP
D. Streams Monitoring
Ans: b
2+. What protocol/service do you need to send TCP/IP trap messages to another computer?
A SNMP
B Simple TCP/IP services
C NWlink
D Network monitor agent
E DHCP
Answer: A (may refer to 15 and 33 and 50)
3. NT Workstation is member of workgroup. You want to map network driver on your computer to a NT Server in the Corp domain. The guest accounts disable in the Corp domain. ( 2 selection )
a. logon to your NTWS by using a user name from the Corp domain.
b. logon to NTWS by the same user name you use to access to the NT Server.
c. Select Corp domain from logon dialog box.
d. Select connect as is the map network drive dialog box.
ans: a,d
3+. Your computer is member of a workgroup. You want to map a network drive to a share on a server PDC in the XYZ domain. The server has had the guest account disabled. Choose two options.
A Log on to your workstation using your domain user account
B Log on to your workstation using the account of a domain member
C In the log on box choose the domain name
D In the map network drive box in explorer choose "log on using account" option
E In the map network drive box in explorer choose "connect as" option
Answer: A, E
4. Client service for Netware :
a. allow Netware client to use share directory and printer on NT Workstation.
b. connect volumes or directory on Netware.
c. connect printer queues on Netware.
d. connect Netware 4.1 volume on server that do not run bindery emulation.
e. Run Netware 3.1 syscon utility from NTWS.
f. Function as gateway to NTWS for them NTWS that do not have CSNW installed.
Ans : b,c, e PLS refer 16.
5. NT workstation needs access NT server and Netware server on network. What must you install on NT Workstation ( select 2 )
a. DLC
b. TCP/IP
c. NetBUEI
d. SAP agent.
e. CSNW.
f. NWlink IPX/SPX compatable Tranport.
g. PPTP.
Ans : e,f
6. How do you start the backup program in a minimized window with low priority?
a. start /min /low ntbackup.
b. Cmd /min /low ntbackup.
c. Net start /min /low ntbackup
d. Bat /min /low ntbackup
Ans. A
**7. Several MS-DOS Share TSR program be loaded :
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Ans: D
8. You are planning to install NT Workstation and 5 applications on 200 Intel PC＇s. All PCs already have the same hardware and the same applications installed. You will install over the network with an NT server as the source of installation. Which 3 files do you need:
A. unattend.txt (answer file)
B. setup.inf
C. sysdiff.exe
D. a UDF file
E. POLEDIT
ans: a, c, d
9. When you try to establish a RAS connection with your department＇s server, the connectin is dropped after having been connected for a number of seconds. What is the best way to start investigating this problem?
a. activate the Device.Log file, establish a connection and then view the contents of Device. Log.
b. examine the connection error in the application log using Event Viewer
c. examine the connection error in the system log using Event Viewer
d. view the connection status using Dial-Up Networking Monitor.
ans: d
10. You want to enable auditing for the HP printer attached to your Windows NT Workstation computer. Which type of auditing events should you enable in User Manager on your workstation?
a. File and Object Access
b. Use and User Rights
c. User and Group Management
d. Process Tracking
ans: a
11. Which of the following statements best describes the function of an answer file during automated installations?
a. It provides specific settings for installing software applications.
b. It provides user-specific or computer-specific information.
c. It provides answers to some or all of the user prompts during Setup.
d. It provides answers to specific prompts to enable a workstation
computer to join a domain or workgroup.
Answer: c (PLS refer 44 and 52)
12. Your Windows NT Workstation computer has three modems installed. An ISDN line with two B-channels and a dedicated phone line are attached to your computer. Each B-Channel has a separate telephone number. The RAS server to which you plan to connect has four modems and four phone lines installed and has Multlink enabled. How should you configure the phone book entries on your workstation to allow for maximum throughput when connecting to the RAS server?
a. Create a single phone book entry and configure this entry to dial using all three modems. Enter a unique RAS server phone number for each modem to dial.
b. Create a single phone book entry for the modems that are using the ISDN B-channels and another entry for the modem attached to the dedicated phone line. Enter a unique RAS server phone number for each modem to dial.
c. Create two phone book entries: one entry for the modems that are using the ISDN B-channels and another entry for the modem attached to the dedicated phone line. Enter a unique RAS server phone number for each modem to dial.
d. Create three phone book entries: one for each modem being used. Enter a unique RAS server phone number for each modem to dial.
ans: a
13. You implement changes to the system policy for 25 individual user accounts on your domain. You store the system policy file containing the new policy in the Netlogon directory of the PDC. All users log on to the domain when accessing their computers. Your domain consists of 100 Windows NT workstations, four member servers, a PDC and a BDC. At the end of the day, you poll the 25 users to find out how they feel about the changes to the system policy. You discover that five of the users did not receive the changes. What is the most likely cause of the problem?
a. the five users belong to groups that have conflicting systems policies.
b. the PDC was down when the users logged onto the domain
c. the Netlogon directory was not being replicated to the BDC
d. the five users have mandatory user profiles that have conflicting options
ans: c
14. You want to install several network components on your Windows NT Workstation computer. However, your computer doesn＇t have a network adapter installed at the present time. Which of the following would you do?
a. install the driver for the Microsoft Dial-up Adapter, then install other network components.
b. install the driver for the MS Loopback Adapter, the install other network components.
c. install the driver for the Novell NE2000 Compatible Adapter, then install other network components
d. install the driver for the Generic Network Adapter, then install other network components
Answer: b
15. You want to capture packets tranmitted to and from your network card. Which of the following do you need to install?
a. Network Monitor Agent
b. System Management Agent
c. RAS
d. PPTP
Answer: a
16. You install CSNW on NTWS. What can you do?
a. Allow Netware clients to access files and printers on your computer.
b. Connect to shared directories on a Netware server.
c. Connect to print queues on a Netware Server.
d. Run the SYSCON program on a Netware 3.12 server.
e. Run login script from Netware server.
f. Attach to a Netware 4.x server using NDS.
g. Allow other Microsoft users to attach to Netware through your computer.
ans: All except A and G are correct.
16+. NetWare question, with CSNW installed on your NT Workstation, what function can be performed?
a) run netware login script
b) access NDS volume and directories
c) run syscon
d) logon to Netware 3.11 bindery server
e) act as a gateway for other NT W/S
f) access netware printers
g) logon to a Netware 4.1 server that does not support bindery emulation
h) allow Netware users to access print services on NTWorkstation
Answer: I chose a,b,c,d,f
======================================
17. You are the administrator of 25 winNT computer that is member of Corp domain. You create a system policy for the Domain User group. After you implement the policy, you notice that it has not take effect for 3 users acconts. You verify that each 3 users are members of Domain Users Global group.
a) The users have system policies for their individual user account.
b) The user have roaming user profiles with setting that override the system policy you set for Domain Users Group .
c) The Win NT w/s computer used by 3 users have computer policies that are taking percedence over the group policy.
ans: a.
18. Implement restritions on WinNT w/s so that SHUTDOWN option in the LOGIN INFORMATION dialog box is disable.
=> On the PDC , create a system policy, save it in Netlogon share folder.
19. Adam (adaministrator) is retiring . A replacement Barbara will replace Adam ＇s position.
=> Rename Adam＇s account with Babara＇s name, change password, instrust Babara to
log on with renamed account.
20. CSNW access print device to Netware Server. Disable printing of Blank page while first printing. => Configure CSNW so that a form feed is not added.
20+. You are printing to a NetWare printer, how do you disable the blank page at the end on each print job?
A From within CSNW, deselect add form feed
B From GSNW, deselect add form feed
C From Print Manager, disable form feed
Answer: A
Note that if the blank page contains only your user name, etc, that is a banner page, not a form feed!
21. Sharing printer on your workstation......Users of Win95, WinNT 3.51 & WinNT 4
need to share your printer.
=> Install WinNT 4, NT3.51 & Win95 printer drivers for the new printer on your computer.
22. Printing lenghty documents automatically during non business hour on your computer.
=> Create 2 printers for each print device . Configure the available hour for printer
1 to business hour only.
Assign printer 1 & high prority than printer 2.
Instruct the users to send all lengthy documents to printer 2.
23. Diagram -> Local group ! Share permission ! Directory ! File
Webmaster Change Special Access (WX) ! Full Control
Users Read Special Access (R) Special Access (R)
Eric is member of Webmaster & User . Which right in share folder ?
=> Change
24. 2 different way to change password from CSNW . choose 2 answers
=> 1. SETPASS at command prompt , 2. CTRL+ALT+DEL
25. Allow Bruce to access Netware 3.12 server name Accounting .
=> with a prefer server named Accounting.
27. How to configure w/s to automatically activate the ISP＇s PPP support.
=> Create a script & configure DUN to run the script after dialing.
28. Upgrate 386 to NT workstation .
=> no.................. minimum is 486 computer.
29. DUN to connect . Disconnect after 3 sec.... tools to diagnose the cause.
=> Dial up networking monitor.
30. Nt server 3.51 & NT w/s 4 use dual mode.
=> install NT w/s in its own directory.
30+. Your computer had NT 3.51 installed. The computer is a member server in a domain. You want to install NT 4.0 Workstation and configure the machine to dual-boot. How do you do this?
a) Install NT 4 in the same directory as NT 3.51
b) Install NT 4 in its own directory
c) Install NTWS by using typical set up
d) Install and then add system folder＇s ARC path name to boot.ini
Answer: b
31. Sysdiff.exe function. => to automate the installation of application .
32. Move NT w/s from Domain 1 to Domain 2. => Click CHANGE button on IDENTIFICATION of NETWORK dialog box.
==================================================================
33. What service/protocol must you install to view statistics on packet transfers on Ethernet Network?
a. Streams environment - (I don＇t know what this is)
b. SAP
c. Network Monitor Agent
The Answer is c.
33+.Which protocol must be installed to use Performance Monitor to gather statistics from your network.
A: Network Monitor Agent.
?*34. When Susan tests her display, the screen goes blank. When she restarts, the Display properties dialog is opened. What’s wrong?
a. Display type
b.Refresh rate
c.Color palette
ans: b
?*34+. You are installing NT and testing the monitor type and the screen goes black. When you reboot you are put back into the monitor type selection screen. What is the problem?
A Refresh rate
B Resolution
C Monitor type
D Color depth
Answer: C
35. Which of the following is used to search for the value of a key in the registry?
a. regedit.exe
b. regedt32.exe
c. Poledit.exe
d. System policy editor
Answer: a
note: The main difference between regedit and regedit32 is that 32 can only search for keys in the registry, and regedit can search for strings, values, etc
36. For those who haven＇t seen it yet: The infamous Dr. Watson question
Under this question you see two Windows next to each other: Left Dr.Watson,
Right System Properties from Startup/Shutdown tab. Point the correct box.
Answer: The Create Crash Dump in Dr.Watson windows (and not the Write Debug info to....
In the System Properties window) The last one is for memory dumps for the system, the
first one for crash dumps for applications. You will just have to put a crosshair in
the correct checkbox (it is the last checkbox in the Dr. Watson Screen)
36+. What would you enable to record a memory dump following an application failure?
You are supposed to place a target with crosshairs on the correct area
A Create crash dump file On Dr. Watson window
(Remember application crash dumps are done in Dr. Watson, system
stop errors and memory dumps are done in FAULTLOG on the startup/shutdown menu.)
**37. This next scenario question was given 3 times in a row. The situation and results were
the same each time but there was a different proposed solution. This was the trickiest
part of the test.
Situation:
You need to install Windows NT Workstation on 70 identical desktop computers and 30 identical
laptop computers. All of the computers will be part of a domain called CORP.
Required Result:
You must automate the installation of Windows Workstation on all the computers
Optional Results:
You want all the computers to join the CORP domain during the installation process.
You want to automate the installation of all applications
One of the proposed solutions seemed OK till the point where it said to use Windiff to
automate the installation of applications. For this one, only the required and one optional
was met.
Another was totally absurd where it said to boot from DOS and install in each computer.
here no requirement was met.
38. You have sent a job to a printer and it jams. You cannot re-send the job to the printer,
what do you do?
a. Select resume from document menu?
b. Select restart from document menu?
c. Select cancel from document menu and then restart?
d. Select refresh from view menu and then resume?
ans: b
39. You want to send a document from your Windows NT workstation computer to a printer
that is located on another Windows NT WS computer. You want to do this without
permanently installing drivers for that printer on your hard disk. What should
you do? (Choose one)
a. Use "net print" to send the document to the printer.
b. Drag and drop the document file onto the printer in Windows NT explorer.
c. Use Windows NT Explorer to temporarily capture the printer, and then send the document
to the printer.
d. Use the Add Printer Wizard to temporarily connect to the printer, and then send the
document to the printer.
ans: b
**40. You want to set the boot delay time to 10 seconds. How should you proceed?
Choose all that apply
a. Edit Boot.ini to set timeout to 10 seconds
b. Use Control Panel System Properties Startup – Shutdown tab
c. Use system properties
d. Edit HKEY_CURRENTCONFIG in the registry
Answer: a,b
a.use User Manager for domain to set roaming profiles
b.use a system policy to create a roaming profile for all users
ans: a?
2.Paper jam hapen!and document is serousely damaged!How to reprint?
In document menu restart!
One computer used by three users. They want their files securely and own their individual desktop setting. What THREE steps must you do for them:
A.Create one account for each user
B.Create one account for three user to share
C.Create one profile for each user
D.Create home directory for each user on NTFS partition.
E.Create home directory for each user on FAT partition.
F.Create home directory for each user on HPFS partition.
G.Set permission to each user to let them exclusive access their own home directory.
上一篇文章: NT Workstation 4试题5 下一篇文章: 微软认证模拟试题:SQL Server考题