微软认证考试:基础知识篇（5）
添加时间: 2007-4-8 1:32:19 作者: 微软认证参考 阅读次数:62 来源: http://www.d9soft.com
61.
Your network contains of 10 computers ,which run MS-windows NT workstation,Which kind of access control can you use to protect the shared resource on the network? (choose all that apply)
a.special users and groups who have access to each shared resouce.
b.supply a password for each shared resource.
ans:a
62. Match the definationto the networking term
the signal interference created by emission:fa song: that pass from a cable to another.
a.attenuation
b.loopback
c.crosstalk
d.beaconing
ans:c
64.what is the charactoristic of IEEE 802.3 10base-T protocol?
a.RJ-11
b. UTP cable
c.BNC T-connecteors
d.50_ohm terminator
ans:b
65.which kind of topology is illustrated in the following picture?
a. bus
b. ring
c. mesh :wang:net:
d. star
ans:c
66.
What must you specify when you want to copy a file from a computer by using UNC name(two)
a. share name
b.domain name
c.computer name
d.workgrounp name
ans:ac
67.The device functions at or above the transport layer of the OSI model between two computors,it act as a translaterbetween two computers that use diffrent protocols or data formats.
a.gateway
b.router
c.repeator
d.bridge
ans:a
68. IEEE802.3 10Base2 standard?
a ,it specify category 3 UTP cable with a maxiamum cable length of 100 meters
b.it specify RG-11 C/U coaxial cable with a maxiamunm cable length of
500meters
c.it specify BNC T-connector for connecting computer to cables
d,it specify RJ-45 connectors at the end of each cable
ans:c
69. The server on your network run Ms-windows nt server ,the client computor run windows 95,you want to monitor network activity and evaluate network communication at the packet level.
which tool should you use?
a.performence monitor
b.protocol analyzer
c, TDR
d.volt-ohmeter
ans:b
70.which device should use to monitor the mount of the network traffic over time?
a.TDR
b.Cable tracer
c.protocol analyzer
d.medium attachment unit
ans:c
71.configuration of your client computer
SVGA card,SCSI cardset at IRQ15,LPT!,LPT2,COM1,COM2,PS/2mouse port
the computer runs NT workstation.
you are installiing a token-ring network adapter card in the computer,,use IRQ3,
Which device could cause IRQ conflictin the computer?
a.com1
b.com2
c.lpt1
d.lpt2
ans:b
72. which tool should you use to create a report that logs network activity?
a.TDR
b.osci???
c.protocol analyzer
d.volt-ohmeter
ans:c
73.you want to segment you 200-node network into three subnets.you use Tcp/ip.
which device should you use?
a.repeater
b.bridge
c.routor
d.gateway.
ans:c
74.which protocol is routable?
a.Appletalk
b.Tcp/ip
c.Nwlink ipx
d.netbeui
e.DLC
ans:abc
75.which type of wan-connection service is intened to make the most reliable connection?
a.X.25
b.frame relay
c.ATM
d.FDDI
ans:a
上一篇文章: MCSE模拟试题：NTServer4.0 下一篇文章: MCSE模拟试题：NtServer4.0考题
相关文章: