微软认证考试:企业技术篇（3）

添加时间: 2007-4-8 1:54:18 作者: 微软认证参考阅读次数:30 来源: http://www.d9soft.com

31.You are installing a new Windows NT server computer on your single domain network.You dod not want this server to validate user account logon requests.You do want to allow specific user accounts and groups from the domain to be permitted to use certain shared resources on the server.
How should you configure this server?
A.as a member server that has joined the domain
B.as a member server that is a member of a workgroup
C.as a member seerrver that has the Server service disabled
D.as a BDC in the domain
ans: a
32.You want to allow users who log on from a Windows NT Workstation computer that is not a member of any domain to access resources on servers in the SALES domain.
How can you accomplish this?(Choose two)
A.Enable the guest account in the SALES domain.
B.Create a duplicate user account in the SALES domain for each Windows NT Workstation user account thawt requires access to resources in the SALES domain.
C.Make user accounts on the Windows NT Workstation comoputer members of the appropriate groups in the SALES domain.
D.Create a duplicate group account for each group on the Windows NT Workstation computer.
ans: ab
33.Situation:
　You are connecting two identical print devices to a Windows NT Server computer.
The print devices are used by various groups as shown as following:
　 Managers　　　　　 1-10 pages
　 Sales　　　　　　　1-10 pages
　 Accounting　　　　 500+ pages
The Accounting group application performs calculations while it prints,often pausing and restarting the printing process.
Required results:
　Print jobs submitted by the managers group must take precedence over all other print jobs.
Large print jobs submitted by the Accounting group must not use more than one print device at a time.
Optional desired results:
Minimize the amount of print device time consumed by large print jobs submitted by the Accounting group.
Ensure that all print jobs submitted by the Managers and Sales groups are printed before any large print jobs submitted by the Accounting group are sent from the printer to the print device.
Proposed solution:
Create and configure printers and printer pools as shown as following:
　　　　　　 managers printer　Sales printer　Accounting printer
configure
print devices:　pool to both　　　pool to both　 connect to only one

remove　　　　　 every special　 Everyone special　 Everyone special
permissions for:　　 group　　　　　group　　　　　　　 group

Assign Print　　　Managers group　　Sales group　　　Accounting group
Permissions to:　　only　　　　　　　　only　　　　　　　only

Assign printer
priority:　　　　　Higghest(99)　　　Medium(50)　　　 Lowest(1)

Set printing
to begin after
spooling:　　　　　 First page　　　First page　　　 Last page

Which results does the proposed solution produce?
A.The proposed solution produces the required results and produceds both of the optional desired results.
B.The proposed solution produces the required results and produceds only one of the optional desired results.
C.The proposed solution produces the required but does not　produced either of the optional desired results.
D.The proposed solution does not prooduce the required results.
a
34.You use the DLC prorocol to connect a Windows NT Server computer to a network-connected print device.You have just reset the print device,and now cannot print to it.
What is the most likely cause of the problem?
A.A duplexing unit has been installed on the print device.
B.The DLC protocol has been uninstalled on the print device.
C.Anotherr computer on the netrwork has connected to the print device by using the NWLink IPX/SPX Compatible Transport.
D.Anotherr computer on the netrwork has connected to the print device by using the DLC protocol,and selected Continuous connection.

d
35.All hard disks on your Windows NT Server computer are formatted with NTFS.After rebooting theserver,you receive the following error message.

OS Loader V4.00
.
Windows NT could not start because the followinmg file is missing or corrupt:
system32 toskrnl.exe.
Please re-install a copy of the above file.
What should you do to reboot the server?
A.Reinstall Windows NT Server.
B.Reformat the drives with FAT partions.
C.Perform the emergency repair prodcess.
D.Restore the missing file from the tape backup.
ans: c
36.Your Windows NT Server computer has two SCSI hardd disks.The hard disks are confgiuredd as SCSI ID 0 and SCSI ID 1 on a single SCSI host bus adapter.The hard disks are mirrored,and each hard disk is formatted with a single NTFS partition.One of the hard disks has just failed.You replaced the failed hard disk.
What else should you do to recover from the hard disk failure?
A.Choose Establish Mirror in Disk Administrator.
B.Choose Break Mirror in Disk Administrator,and then choose regenerate in Disk Administratot.
C.Choose Break Mirror in Disk Administrator,and then choose establish Mirror in Disk Administratot.
D.Wait for Windows NT Server to regenerate the mirror.
ans: c
37.You are experencing system errors on your Windows NT Server computer. Mircosoft Enterprise Technical Support has requested a dump of system memory to a file.Yo uhave configured a system paging file on your boot partition that is larger than the total amount of system RAM.
How should you configure the Windows NT Server computer to generate the required dump file?
A.Configure the EventLog serrvice to start automatically.
B.Configure Dr.Watson for Windows NT to create a crash dump file .
C.Configure system recovery to write an event to the system log.
D.Donfigure system recovery to wrtite debugging information to %SystemRoot%Memeory.dmp.
ans: d
38.Situation:
You are designing the directory services architecture,the trust relationships,and the placement of domain controllers for the Windows NT Server network as shown as following:
Caracas has 1000 client computers;
Chicago has 4000 client computers;
Paris　 has 2000 client computers;
Seattle has 500 client computers;
Dallas　has 200 client computers;
Atlanta　has 700 client computer;
Caracas ,Paris,Seattle,Dallas and Atlanta trust Chicago
Caracas and Paris connect Chicago by 56-kbps link.
Seattle,Dallas and Atlanta connect Chicago by T1.

Required results:
　1.Minimize the amount of logon validation over the WAN links.
　2.Allow users in Caracas and Paris to access resources in Chicago.
　3.Allow users in Chicago to access resources in Caracas,Paris,Seattle,Dalla and Atlanta.

Optopnal desired results:
1.Allow administrators in each city to control access to network resources in their respective cities,but do not allow administrators to control resources from other cities.
2.Provide centralized management of user accounts.

Proposed solution:
1.Use the single domain model,and place the PDC and one BDC in Chicago.
2.Place at least one BDC in each other city.
3.Administer all access to network resources from Chicago.

Caracas has 1000 client computers;
Chicago has 4000 client computers;
Paris　 has 2000 client computers;
Seattle has 500 client computers;
Dallas　has 200 client computers;
Atlanta　has 700 client computer;

Caracas ,Paris,Seattle,Dallas and Atlanta trust Chicago
Caracas and Paris connect Chicago by 56-kbps link.
Seattle,Dallas and Atlanta connect Chicago by T1.

Required results:
　Minimize the amount of logon validation over the WAN links.
　Allow users in Caracas and Paris to access resources in Chicago.
　Allow users in Chicago to access resources in Caracas,Paris,Seattle,Dalla and Atlanta.
Optopnal desired results:
Allow administrators in each city to control access to network resources in their respective cities,but do not allow administrators to control resources from other cities.
Provide centralized management of user accounts.

Proposed solution:
Use the single master domain model,and place all the user accounts in the Chicago domain.
Configure all other locations as resource domains.
Configure Chicago as the trusted domain ,and all other cities as trusting domains.
Place the PDC and a BDC for the Chicago domain in Chicago, and place at least one BDC for the Chicago domain in each other city.
Which results does the proposed solution produce?
A.The proposed solution produces the required results and produceds both of the optional desired results.
B.The proposed solution produces the required results and produceds only one of the optional desired results.
C.The proposed solution produces the required but does not　produced either of the optional desired results.
D.The proposed solution does not prooduce the required results.
a
40.Your Windows NT Server network has two domains named SALES and TEST. The programmers in the TEST domain want access to the shared CD_ROM drivers in the SALES domain. The SDUsers local group in the SALES doamin has Read permission for the shared CD-ROM drives.
How shoulds you configure your network to share the CD-ROM drives?
A.Configure the SALES domain to trust the TEST domain.
　Create a global group for the programmers in the TEST domain.
　Add this group to the SALESCDUsers group.
B.Configure the SALES domain to trust the TEST domain.
　Create a local group for the programmers in the TEST domain.
　Add this group to the SALESCDUsers group.
C.Configure the TEST domain to trust the SALES domain.
　Create a global group for the programmers in the TEST domain.
　Add this group to the SALESCDUsers group.
D.Configure the TEST domain to trust the SALES domain.
　Create a local group for the programmers in the TEST domain.
　Add this group to the SALESCDUsers group.
ans: a
41.Your university has 75,000 users located in multiple buildings in a campus setting.You want to have centralized control of all accounts.You also want to allow each department to manage its own user s access to information.
Which directory services architecture should you use?
A.single domain.
B.single master domain.
C.multiple master domain.
D.complete trust.
ans: c

42.Your company plans to open offices in new locations.Client computers at each location will need access to data stored at corporate headquarters.Each location will have one Windows Nt Server computer.You will use TCP/IPat all locations.
　You want to simplify the administration of IP address assignment.You also want to simplify access to resources on Windows NT Server computers in remote location.

How will installing DHCP help provide these results?
A.DHCP will provide IP addresses to client computers at each location.
B.DHCP will boardcast each local client computer s NetBIOS name acrross the WAN.
C.DHCP will recolve the NetBIOS name of a remote Windows NT Server computer to an IP address.
D.DHCP will resolve the IP address of a remote Windows NT Server computer to　 a MAC address.
ans: a
43.you are establishing a baseline on a Windows NT Server computer that servers as a file-and-print server for shared network applications.Using Performance Monitor,you select counters that display disk I/O statistics.From another computer,you perform a number of file-access routines to generate disk statistics.However ,in Performance Monitor all disk counters remain at 0.
What is the most likely cause of the problem?
A.The SErver services was not started on the server.
B.The Workstation services was not starte on the server.
C.The diskperf -y command was not used on the server.
D.response Probe was not started on the server.
ans: c
44.you want to gather information about you Windows NT Server computers.How should you create a baseline of system performance?
A.Collect data by creating simulations of random activity to test the anticipated load on the server.
B.Collect data by creating simulations of constant activity to test the anticapated load on the server.
C.Collect data during representive production and nonproduction hours so that comparisons can be made with later activity.
D.Collect data during nonproduction hours so that coomparisons can be made to activity occuring during normal working conditions.
ans:b
45.You are using Windows NT Server 4.0 Network Monitor on your Windows NT server network.All computers on the network use TCP/IP with DHCP and WINS.You capture 800 packets.
What should you do to view only th epackets that were sent server by a specific computer on the network during the capture period?
A.configure the display filter to filter by protocol.
B.Configure the display filter to filter by address.
C.Edit the address database.
D.Sort the NetWork Address column in the Capture window.
ans: b
45.You want to make changes to the registry of all Windows NT Workstation computers on your network to reflect settings for custom in-hopuse applications.You will use System Policy Editor to create policy files that specify these settings.
What else must you do to be able to create policy files that contain these custom settings?
A.Import the registry key from a Windows NT Workstation computer that contains the settings into System Policy Editor.
B.Import an .ini file that contains the application s settings into System Policy Editor.
C.Create a system policy template file that contains the registry settings.
D.Use the Registry Editor to copy and paste registry settings from a Windows NT Workstation computer into System Policy Editor.
ans: c

46.Your network consists of three domains.The CORP domain contains all user accounts.The EAST and WEST domains trust the CORP domain.Allusers use Windows NT Workstation computers.
You want to configure the network so that any user installing a new Windows NT Workstation computer can jion any domain without any configuration needed from an administrator.
How should you do this?
A.Modify the user rights in all three domains so that the CORPDomain Users global group can add computers to any of the domains.
B.Modify the user rights in all three domains so that the Users local group in each domain can add computers to any of the domains.
C.Modify the user rights in the CORP domain so that the Users local group can add compters to the CORP domain.
D.Modify the user rights in the CORP domain so that the
Domain Users global group from each domain can add computers to the　CORP domain.
ans: a
47.You need to create a roaming user profile for a group of user accounts.You do not want the users to be able to modify theiir profiles.You log on with a new user account that will server as a template and make modifations to each users profile.You copy the profile to each user s profile dircetory.
What else should you do to implement these profiles?
A.Use Windows NT Explorer roassign Read permission to the NTuser.dat file in each user s profile directory.
B.Rename the NTuser.dat file to NTuser.man in each user s profile directory.
C.When you copy the user profile to each user s profile directory,specify that only an administrator is permitted to use the profile.
D.Use System Policy Editor to specify th path for each user s profile.
ans: b
48.You want to create a system policy that specifies network access settings for all Windows NT Workstation computers in a domain.You use System Policy Editor to define these settings,and save them to a file named NTConfig.pol.
What do you need to do to activate these policies?
A.Use the User Profiles tab of the System option in Control Panel to specify the path where the policy file will be located.
B.Create a system default profile that contains a shortcut to the directory that contains the policy　file.
C.Save the policy file in the path specified for each user s profile directory.
D.Save the policy file in the Netlogon shared directory on the PDC.
ans: d
49.you plan to transfer user accounts,files,and permissions from a NetWare server to a Windows NT Server computer.
What must you have to accomplish this?
A.TCP/IP on both servers
B.NetBEUI protocol on both servers
C.a FAT partition on the Windows NT Server computer
D.an NTFS partition on the Windows NT Server computer
ans: D
50.Your network has three Windows NT Server computers in a single domain.One is a PDC,and two are BDCs.You are migrating files and user accounts from three Netware server computers to the three Windows NT Server computers.Some of the users have accounts on more than one of the NetWare server computers.
You want each user to have only one account in the Windows NT domain.You do not want existing user accounts on the WINNT domain to be overwritten during the migration.
What should you do to ensure that the user accounts are migrated according to your requirements?
A.Migrate all user accounts,then delete any duplicates.
B.Select Overwrite in the Duplicate Names dialog box.
C.Migrate user accounts one at a time by using User Manager for Domains.
D.Create a mapping file to specify how user account information is transferres.
ans: d

上下文章:

上一篇文章: 微软认证考试:基础知识篇（7）下一篇文章: 微软认证考试:基础知识篇（6）

相关文章:

相关软件:

微软认证考试:企业技术篇（3）

快速导航

微软认证分类导航

本类经典文章推荐

MCSE模拟题阅读排行

微软认证阅读总排行

广告位置