NT Workstation 4试题2
添加时间: 2007-4-8 2:37:14 作者: 微软认证参考 阅读次数:38 来源: http://www.d9soft.com
Pepe
Hi Everyone here is my Braindump it is a collection of braindumps I have found and used and updated (as I do not have any claims to perfection please check the answers). I hope this will help others as this wonderful site has helped me I passed Workstation with a score of 933/1000.
1: A user wants the option to print large jobs after hours. How can this be done?
A: Create two printers
Give one the option to print after hours.
Note: This question will either request the option to print after hours, or require users to print after hours. Two different answers! Make sure if question requires the option, you give users the option, and vice versa.
2: You are tasked to setup up 80 identical workstations and 20 identical notebooks. You must install Windows NT Workstation 4.0 and WordPerfect on all 100 computers. All the computers will be clients in a single domain, Sales.
Required result: You must automate the process of installing Windows NT Workstation 4.0 on all 100 computers.
Optional results: You want to automate the process of installing WordPerfect on all 100 computers. All 100 computers should join the Sales domain during the installation of Windows NT Workstation 4.0.
SOLUTION
Create two answer files and two UDF files.
In the [Unattended] section of the answer files add the line:
"OemPreinstall=Yes"
In the [Network] section of the answer files add the line:
＇tjoin Domain=Sales"
Use Windiff exe Isnap to take a snapshot of the reference computer.
Install the applications (Windows NT Workstation 4.0 & WordPerfect) on the reference computer
Use the Windiff exe Idiff to create the difference file, then use Windiff exe apply to run the difference file.
Start the installation process by using the "winnt.exe" command with the appropriate answer files and UDF files.
Which results does the proposed solution produce?
A: The proposed solution does not produce the required result or any of the optional results.
3: You must print to a NetWare printer. How do you disable the blank page at the end of each print job?
Answer From within CSNW, deselect Add Form Feed.
*Note that if the blank page contains only your user name, etc, that is a banner page, not a form feed!
4: RAS server with 3 modems and Multilink enabled. Administrator implements Callback Security on the server. How does it work?
A RAS server recalls with three different telephone numbers.
B RAS server recalls with one telephone number.
C RAS server recalls with two telephone numbers only
D It doesn＇t work
Answer: D (Multilink cannot be used with callback security unless there are two (or more) modems configured on the same phone number.)
5: How can you implement security on your Workstation after 15 minutes of inactivity?
A: Enable a screen saver with a password
6: You must optimise your Workstation. The requirement is to speed up access to your hard disks and files?
Proposed Solution:
A: If the solution offered is to create a Volume Set, then it will not produce required result Volume sets do not speed up access.
7: What protocol do you need to use a MAC printer?
A. Apple-talk
8: A system policy is set for a group with 50 members. 3 users do not notice any changes. Why?
A: The 3 users have an individual system policy, which overrides group policies.
9: What is the smallest activity that can be scheduled by the processor?
A: A thread.
10: You are running three integrated Windows16-bit applications on your Windows NT Workstation computer. These applications use shared memory blocks to communicate with each other. When one of the three integrated applications halts, it stops the execution of all 16-bit Microsoft Windows-based applications that are running. You want to continue using the three integrated applications, but you want to keep them from interfering with other 16-bit applications. How can you do this?
A Run the one application that halted in a separate memory space. Run all of the others in the default memory space.
B Run the three integrated application in the default NTVDM, Run all others in a their own NTVDM.
C Run each application in a separate memory space.
D Run each of the three integrated application in its own separate memory space. Run all others in the default memory space.
Answer: B
11: You have a Workstation dual booting between NTWS and DOS with one FAT partition. How do you remove NT?
A: Boot to DOS. Run SYS. COM and remove all NT files.
12: You want to install your networking protocols, however you do not yet have a network adaptor card. What can you use?
A: Use the MS-loopback support driver.
13: Where would you install a sound card with MIDI support?
A: Select the Multimedia icon from within Control Panel
14: What two utilities can you use to see memory utilisation?
A: Task Manager and Performance Monitor
15: Which of the following is used to search for the value of a key in the registry?
A regedit.exe
B regedt32.exe
C Poledit.exe
D System policy editor
Answer A
* The main difference between regedit and regedit32 is that 32 can only search for keys in the registry, and regedit can search for strings, values, etc
16: How can a user share a directory on his Workstation?
A: Log in as administrator and share the directory-using Explorer
17: How can a Workstation join a domain during installation?
A: You must use an administrator name and password
18: After restarting Windows NT Workstation, monitors show a blank blue screen without text and the computer stops responding. You discover that an incorrect driver was just installed. What should you do to correct the problem?
A Call the manufacturer to request an NT compatible driver
B Use the Last Known Good Configuration to restart your system and correct the problem.
C Use the emergency repair disk
Answer: B Remember: If it＇s recent changes to the machine that caused the problem, you can usually fix it with LKGC.
19: How do you give a user who is taking over from a retiree all the retiree＇s previous permissions?
A: Rename the account to the new user and reset the password
20: How do you change a password on a Netware server?
A: Use "setpass" for 3.x and CTRL-ALT-DEL for NDS. NetWare (Directory Services)
21: What is required to have TCP/IP addresses configured dynamically and automatically?
A: DHCP (Dynamic Host Configuration Protocol)
22: You have an NT Workstation connected to 2 routers, you want the NT Workstation to be able to route, which of the following do you have to install:
A IP
B Subnetmask
C Default Gateway
D DHCP
Answer: A, B, C
*Note, if not routed, all you need is IP and subnet mask.
23: What Control Panel applet is used to configure modems?
A: By selecting the Modem Applet in control panel
24: What two things do you need to print to a TCP/IP printer on a network?
A Hostname + IP-address
B Hostname + subnetmask
C IP-address + printername
D Printername + hostname
Answer: C
25: What protocol/service do you need to send TCP/IP trap messages to another computer?
A SNMP
B Simple TCP/IP services
C NWlink
D Network monitor agent
E DHCP
Answer: A
26: One computer used by three users. They want their files securely and own their individual desktop setting. What THREE steps must you do for them?
A Create one account for each user
B Create one account for three user to share
C Create one profile for each user
D Create home directory for each user on NTFS partition.
E Create home directory for each user on FAT partition.
F Create home directory for each user on HPFS partition.
G Set permission to each user to let them exclusive access their own home directory.
Answer A D &G
27: There are 20 laptop computers and 50 desktop computers. You want to install NT workstation 4.0 and five applications on them.
Required: Auto install NT
Optional: Auto install applications
Join them to domain CORP
Solution: Create one SETUP.INF.
Create UDF file for them.
Install one computer with NT. Run Sysdiff.exe /snap. Install five applications. Run Sysdiff.exe /diff to create diff file.
Install all the other computers with the Unattended.txt file.
Use Sysdiff.exe /apply to auto install applications.
a. Solution meets the required and all the optional.
b. Solution meets the required and only one the optional.
c. Solution meets the required and no optional.
d. Solution does not meet the required.
I keep my eyes huge to search TWO unattended.txt files or ONE. After my several times skimming. I found the words "ll computers the unattended.txt file" (CAUTION not "files"). So I think there is only one unattended.txt. I choose d.
28: One Lan that has both novell and NT servers. 1 workstation running NT 4 - what two protocols do you need to install so that the workstation can use the resources on both servers.
1. TCP/IP
2. Nwlink
3. CSNW
4. GSNW
Answer 1 & 2
Note: Watch out for the word protocol. CSNW and GSNW aren＇t protocols!
Also, remember that with only NWlink, your NT client can still access client/server apps on the NW server, without CSNW being installed. Installing CSNW enables your NT client to access file and print shares on the NW server.
29: Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each.
Required result: To optimise performance for optimum speed of access to local data files.
Optional results: Reconfigure for optimum speed of access to paging file. Optimise network access performance.
Proposed solution: Configure the first hard disk as boot partition. Configure the other 3 disks as a strip Set. Use NTFS on all partitions. Place data on the strip Set. Place paging file strip Set. Configure order of protocols at bottom The solution produces:
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Answer B
30: The printing job of Invoices is sent to a printer and it jams in between. The program will not allow to re-submit the job to the printer, what you will do to rectify this problem?
A) Select resume from document menu
B) Select restart from document menu
C) Select cancel from document menu and then restart
D) Select refresh from view menu and then resume
Answer B
31:Installing NT Workstation with NT Server stores the files. Which 3 files do you need?
A.Setup.inf
B.UDF
C.sysdiff
D.unattend
E.windiff
F.Poledit
Remember one thing, there is not any kind of Setup.inf bullshit thing in any kind of unattend installation in NT, that thing is only to trap you, in above question the installation files are on NT SEVER, so it doesn＇t make any difference, where ever the installation files are. Only you need B, C&D (unattend udf & sysdiff).
32: Which three files to use when performing unattended installation with identical applications installed?
Answer UDF, sysdiff.exe and answer file
33: You want to automate the installation of 20 laptops and 50 PCs.
Required: Automate the installation of applications on 70 computers
Optional:
Automate installation standard suit of win32 based application
You want to configure all computers to join CORP domain during installation
Solution. -
2 answer files, 1 UDF, use Windiff
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results
Answer D (because u need 2 answer files to automate installation on 2 different kind of computers means laptop and desktop, so u need 2 answer files, one udf file for computer specific or user specific information and sysdif.exe for to automate the installation of applications. Remember not windiff.exe)
34: You want to automate the installation of 20 laptops and 50 PCs.
Required: - Automate the installation
Optional: - Automate installation of apps. Make it join a domain during installation
Solution.
Create an unattend file with the appropriate lines included to join the workgroup for both platforms.
Create a udf file. Use sysdiff to make a difference file. Apply the difference file.
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results
ANSWER: D (DOES NOT MEET REQ RESULT)
You need 2 UNATTEND.TXT, one UDF and one SYSDIFF.EXE
35: -You need to install Windows NT Workstation on 35 identical new laptop computers and on 55 identical new desktop computers. They will all be members of a domain named SALES.
Required Result:
You must automate the installation of Windows NT Workstation on the computers.
Optional Desired Results:
You want all of the computers to join the SALES domain during the installation process. You want to automate the installation of a standard suite of applications on all the computers.
Proposed Solution:
Create one Setup.inf file to be used for all computers. Create one Uniqueness Database file(UDF) that contains the unique hardware configuration options for each computer. Install Windows NT Workstation on one computer.
Use Sysdiff.exe to take a snapshot of the system, install the suite of applications on this computer, and then use sysdiff.exe again to create a difference file.
Automate the installation of NT Workstation on all of the other computers by using the Unattend.txt file and the appropriate portions of the UDF. Automate the installation of the suite of applications on all of the other computers by using Sysdiff.exe and the difference file that was created earlier.
A. The proposed solution does not produce the required result.
B The proposed solution produces the required result and both of the optional desired result.
C The proposed solution produces the required result and only one of the optional desired result
D The proposed solution produces the required result but does not produce either of the optional desired result.
Answer: Proposed solution does not produce the required result. You need two unnattend.exe files
36: -You are installing Windows NT from a CD-ROM. You get the following message "copysinglefile, non-critical error, could not copy file" What could be the problem?
A Your disk is full
B The CD-ROM is not on the HCL list
C The file already exists
ANSWER: -B.
37: -Your NT Workstation 3.51 computer has a 33 MHZ, 386 processor and 16 Megabytes of RAM. You want to upgrade the computer to NT Workstation 4.0, and you want all of the application settings to be the same in Windows NT Workstation 4.0 as they were in Windows NT Workstation 3.51. How should you install Windows NT Workstation 4.0?
A Install NT Workstation 4.0 in the same directory and choose the Upgrade option, then backup all data files. Repartition and format the hard disk, and then install NT Workstation and all applications. Customise the user＇s profile settings and restore all data files.
B You cannot successfully upgrade this computer to Windows NT Workstation 4.0.
C Install NT Workstation 4.0 in a different directory than Windows NT Workstation 3.51. Manually reinstall all applications and recreate all of the user＇s profile settings.
D Install NT Workstation 4.0 in a different directory than Windows NT Workstation 3.51. Use convert.exe to migrate all of the application settings and users profile settings to NT WS 4.0
Answer: B. You need a 486 for workstation
38: When selecting msdos on a dualboot-machine you get an error " non-system disk or disk error"
ANSWER: - Bootsect.dos is missing or corrupt.
39: You want to set the boot delay time to 10 seconds. How should you proceed? Choose all that apply
A Edit Boot.ini to set timeout to 10 seconds
B Use Control Panel System Properties Startup - Shutdown tab
C Use system properties
D Edit HKEY_CONFIG in the registry
Answer: A, B
40: Choose two utilities to monitor processor activity
A Windows NT Diagnostics
B Event Viewer
C Task Manager
D Performance Monitor
Answer: C & D
41-How to create a dumpfile if an application crashed. (They show you 2 screenshots of Dr. Watson and the System-applet. You have to put a crosshair on the correct position)
Answer Place it on ＇create crash dump file ＇in Dr Watson
42: -What would you enable to record a memory dump following an application failure? You are supposed to place a target with crosshairs on the correct area
Answer Create crash dump file On Dr. Watson window
(Remember application crash dumps are done in Dr. Watson, system stop errors and memory dumps are done in FAULTLOG on the Startup/shutdown menu.)
43: - Your computer has NT 3.51 and uses HPFS. How do you install NT 4.0 and preserve security?
Answer: Convert to NTFS and install NT 4.0.
44: How do you start the command "ntbackup /r /e" with low priority?
A net start /low ntbackup /r /e
20. Know all about conversion possibilities from FAT to NTFS, HPFS to NTFS and when such conversions are needed.
21. Know about Virtual memory.
22. Know that for the most optimal performance of your system, place your paging file on all disks other than the one containing the system/boot partition ( especially as long as it is not on system partition)
23. Know what is required to be configured in TCP/IP for a routed as well as non-routed network
24. The Windows NT Boot Process is another very important topic. Know files needed for boot sequence (especially on an Intel machine), files stored on Windows NT Boot disk, that the boot disk must be formatted from Windows NT(very important), and troubleshooting the boot process.
25. Know under what situations to use ERD, Setup Disks, Boot Disks as well as Last Known Good Configuration(LKGC).( if the change to a driver etc was recent, it is probably wise to use LKGC)
26. Options available in CSNW (like Print Form Feed, print banner page and notify)
Hope this helps others
Pepe.
上一篇文章: MCSE模拟题（tcpip） 下一篇文章: MCSE习题——基础知识（7）