MCSE习题——基础知识（2）
添加时间: 2007-4-8 2:51:21 作者: 微软认证参考 阅读次数:43 来源: http://www.d9soft.com
16:
Your company has two floors , your network uses TCP/IP , you want to limit traffic between the floors , so that only packet designation for the other floor are passed across the connecting device.
which device should you chose?
A: gateway
B: router
C: hub
D: repeater
ans:b
17:
Your company is installing a new serven computer network in its large1 room office , the company will relocate in 6 months, the company 's short term lease does not permit change in the building wiring , and there is no existing network cable.
you must choose a topology that keep the installation , and keep costs to minimum.
which topology should you choose?
A: mesh
B: star
c: bus
D: ring
ans:c
18:
Which WAN connection service canprovide transmission speed that faster than 100Mbps ?
A: ISDN basicrateinterface
B: x.25
C: T1
D: ATM
ans:d
19:
You want to use a connection service that provide reliable delivery even when using unreliable swithced connections .
Which WAN connection service should you use?
A: ISDN
B: X.25
C: frame relay
D: ATM
ans:b
20:
Your network has 250 client computers and 6 servers, the network use TCP/IP protocol , you want to segment the network .
Which device should you use?
A:repeater
B:gateway
C:transceiver
D:router
ans:d
21:
Your network has 3 servers ,which runwindows NT server and windows 95 clients,the network use netbeui , you want users of client to be able to access a unix computer, the unix computer share its file by using NFS , you do not want able any new softwareto the client computer
Which device should you use?
A: bridge
B: brouter
C: router
D: gateway
ans:d
22:
You want users of client computer to be able to access an ibm 3090 mainframe by using a IBM 3270 terminal-emulation program , the mainframe is seperate from your network, you do not want to add protocol to the client computers
which device should you use?
A: repeater
B: bridge
C: router
D: gateway
ans:d
23:
You are design a backbone, the backbone will connect 3 networks that are located in 3 different bulidings, the longest distance between any 2 of the building is 1000 meters.
which media should you choose?
A: RG-58 A/U
B: category 5 UTP
c: spread spectrum radio
d: fiber-optic cable
ans:d
24:
you need to connect an ethernet network , a token-ring network , anda fiber-optic networkby usinga device that provides flow control broadcast management , and multiple communication paths
which device?
a: gateway
b:hub
c: router:flow control;
d:repeater
ans:c
25:
You are designing a peer-to-peer network that consist of 5 microsoft windows 95 computer
which protocol should you use?
a: DLC
B: NFS
c: IPX/spx
D: XNS
ans:c
26:
You want to allow Windows 95 computer to share file with dos computer , the DOS computer use netware dos request to access network servers
Which protocol should you use on the Windows 95 computer?
A: NWLink IPX
b:DLC
C: XNS
D: NETBEUI:base on peer to peer;
ans:a
27:
You want a WAN connection service that can be configure for any transmmision speed that is available,
which WAN connection service should you use ?
A: T1
B: X.25
C: frame relay
D: ATM
ans:c
28:
You are installing a 100Mbps ethernet network
which media?
A: RG-62
b: rg-58
c: Fiber-optic cable
D:category 5 UTP
ans:d
29:
You are designing a 100Mbps ethernet network for a 1 floor building , the server will be located in the cabling room, there will be windows 95 client computer , the building has suspending ceiling with 1 meter of space above them. You want to limit costs.
Which media ?
a: coaxial cable
b: fiber-optic cable
c: UTP
d: STP
ans:c
30:
You want to connect 2 ethernet network .you want network to be able to communication by using both netbeui and NWLink IPX , you want to limit the amount of traffic between he 2 networks.
which device?
A: repeater
B: bridge:netbeui is unrouted protocol;
C:router
d:gateway
ans:b
上一篇文章: MCSE习题——基础知识（3） 下一篇文章: MCSE习题——基础知识（1）