MCSE微软系统工程师考试-NT Server 4.0 试题 3
添加时间: 2007-4-8 3:23:40 作者: 微软认证参考 阅读次数:60 来源: http://www.d9soft.com
1. Does the Server service need to be stopped while the registry is backed up.
a. yes
b. no
(ans b)
2. Users are configured with man roaming profiles, the server which contains the profiles goes down, what will happen when the users try to log on
a. will not be able to log on
b. will be able to log on and will get the default user profile.
c. Some other answer
d. will log on but any changes made will be lost
(ans b)
3. You have a winnt server that runs IPX, and you have a netware client, what will the client be able to access
a. Directories
b. Client / Server Applications that run NetBIOS
c. Printers
d. Access no resources on the NT server.
(ans b)
4. How would you install windows 95 over a network, choose all that apply
a. share windows 95 installation files
b. make installation startup disk with network client administrator
c. make installation disk with network client administrator.
d. install using startup disk
e. install using disk set
(ans a,b,d)
5. You have a computer with 5 disks, each with 2 partitions, On the first disk is the boot and system partition, how will you optimize the pagefile.
a. place a pagefile on a disk other than the first disk
b. place a pagefile on each disk except the first
c. place a pagefile on the boot and system partition
d. place a pagefile on a partition other than the boot and system partition.
(ans b)
6. 10 workstations have been moved from the branch office to the headquaters to a domain named CENTRAL, you want the Branch office’s worstations to become members of the CENTRAL domain
a. the domain administrator must use server manager to add the workstation in the domain. The workstation administrator must log on at each workstation to join the domain using the network applet
b. the domain administrator must log on at each workstation and create a computer account in the domain then join it.
c. the workstation administrator must log on at each workstation to create the computer account in the domain.
d. re-install windows NT.
(ans a)
7. You connect to a shared directory on a windows NT server, what special group are you automatically a member of,
a. Interactive
b. Network
c. System
d. Creator Owner
(ans - b)
8. You have a LAN with two Netware servers, 30 dos clients and 20 windows 3.x clients. IPX/SPX is the only protocol used. You are planning to add a windows NT server to the network so clients can use resources located on the new server. Which of the following do you need to install,
a. RIP IPX on the clients
b. NWlink and TCP/IP on the clients
c. NWlink on the NT server
d. GSNW on the NT server
(ans, I think b - better to check)
9. The server has a boot sector virus, how to you recover.
a. boot from a floppy and run SYS /MBR
b. run RDISK
c. run windows NT and select the recovery option
10. You have a mirror set with SCSI disks with the BIOS enabled and one of the disks fail. How do you set the ARC path on the boot disk to point to the mirror on the second disk.
there is an exhibit with this question which shows the system mirror on the second partition on the second disk
a. mutil 0 disk 0 rdisk 0 partition 0
b. mutil 0) disk 0 rdisk 0 partition 1
c. mutil 0 disk 1 rdisk 0 partition 0
d. mutil 0 disk 1 rdisk 0 partition 1
e. mutil 0 disk 1 rdisk 0 partition 2
f. multi 0 disk 0 rdisk 1 partition 2
(ans - f)
11. You have installed GSNW on the NT server, what else needs to be setup on the Netware server
a. NTGATEWAY account on NW
b. NTGATEWAY group on NW
(ans, b)
12. RAS server uses DHCP, what can DHCP also configure
a. Default Gateway
b. FTP
c. DNS
d. WINS
e. Mailserver
f. Subnet
(ans, a, c, f)
13. NT Server has 4 SCSI disks on one controller. User data is in different partition to system, you require fast access and must allow access to data in event of a disk failure, what config would you reccomend
a. Stripe set with parity
b. Mirror set
c. Stripset without parity
d. Duplex
(ans, b, i think)
at first i picked a 3 drive stripe set with partity then remebered that if the single boot drive failed you would not meet the requirement, the server would fail if the system partition failed, which only leaves mirror.
14. How do you create a new share on a remote server.
a. User manager
b. Disk Admin
c. Server manager
d. NT explorer
e Control panel
(ans c)
15. You have 5 NT servers, you want to audit TCP/IP from your windows NT workstation, what do you need
a. SNMP on each server
b. SNMP on your workstation
c. Control Panel
(ans a)
16. How do you find out the operating system and function of other computers in you web
a. server manageer
b. NT Diagnostics
c. Control Panel
d. NT Explorer
(ans a)
17. You have a HP netprinter which does not work, what is the most probable cause
a. Wrong driver
b. DLC not installed
c. You forgot to specify the port
d. The printer is already installed
(ans b)
18. A netware 3.x server is added to you NT domain consisting of 1NT server and 60 Win95 clients. Win95 clients use MS Client for windows . What do you need to do to enable the clients access to files and shared printers on the Netware server.
a. GSNW on the server, You need not configure your Win95 clients
b. Install NWLink and use the MS Client for Netware as the only client
c. CSNW
(ans a - I think)
19. Netware clients need to access NT server running client server app, what do you need
a. CSNW
b. GSNW
c. NWLink / IPX
d. RIP for NWLink / IPX
(ans - c)
20. You have a domain with PDC, BDC, member server, NT workstations and Win95 Client, the PDC works as an export server, which machines can recieve a copy of the replication
a. BDC configured for import
b.Member server configured for import
c. NT Workstation configured for import
d. Win 95 Clients configured for import
(ans a,b,c)
21. You install a printer on you NT 4.0 server, you want to use it as a network printer. In your network there are NT 4.0 and NT 3.51 clients, what drivers should you install.
a. a driver for each platform and NT version
b. only driver for 3.51
c. the driver for NT4.0 only
d. drivers will automatically work
(ans a)
22. How can you ensure that logon scripts match on PDC and BDC
a. just copy them to each server
b. replication of servers
c. synchronize the BDC with the PBC every time you change the logon scripts.
(ans b)
23. You want to allow only administrators to log on to the domain from a domain controller.
a. on your domain controller, refuse members of the group interactive to log on locally
b. remove all members except admins from the interactive group
c. allow only admins to log on locally
(ans c)
24. Remote users complain that they are disconnected when remote acessing the server, after enabling logging in the registy which file would you view,
a. Modem.log
b. Device.log
c. System.log
d. PPP.log
(ans d - check this one)
25. You install TCP/IP in a non-routed network, what else must you configure,
a. subnet mask
b. default gateway
c. WINS
d. DHCP
(ans a)
. You have installed GSNW on the NT server, what else needs to be setup on the Netware server
a. NTGATEWAY account on NW
b. NTGATEWAY group on NW
(ans, b)
12. RAS server uses DHCP, what can DHCP also configure
a. Default Gateway
b. FTP
c. DNS
d. WINS
e. Mailserver
f. Subnet
(ans, a, c, f)
13. NT Server has 4 SCSI disks on one controller. User data is in different partition to system, you require fast access and must allow access to data in event of a disk failure, what config would you reccomend
a. Stripe set with parity
b. Mirror set
c. Stripset without parity
d. Duplex
(ans, b, i think)
at first i picked a 3 drive stripe set with partity then remebered that if the single boot drive failed you would not meet the requirement, the server would fail if the system partition failed, which only leaves mirror.
14. How do you create a new share on a remote server.
a. User manager
b. Disk Admin
c. Server manager
d. NT explorer
e Control panel
(ans c)
15. You have 5 NT servers, you want to audit TCP/IP from your windows NT workstation, what do you need
a. SNMP on each server
b. SNMP on your workstation
c. Control Panel
(ans a)
16. How do you find out the operating system and function of other computers in you web
a. server manageer
b. NT Diagnostics
c. Control Panel
d. NT Explorer
(ans a)
17. You have a HP netprinter which does not work, what is the most probable cause
a. Wrong driver
b. DLC not installed
c. You forgot to specify the port
d. The printer is already installed
(ans b)
18. A netware 3.x server is added to you NT domain consisting of 1NT server and 60 Win95 clients. Win95 clients use MS Client for windows . What do you need to do to enable the clients access to files and shared printers on the Netware server.
a. GSNW on the server, You need not configure your Win95 clients
b. Install NWLink and use the MS Client for Netware as the only client
c. CSNW
(ans a - I think)
19. Netware clients need to access NT server running client server app, what do you need
a. CSNW
b. GSNW
c. NWLink / IPX
d. RIP for NWLink / IPX
(ans - c)
20. You have a domain with PDC, BDC, member server, NT workstations and Win95 Client, the PDC works as an export server, which machines can recieve a copy of the replication
a. BDC configured for import
b.Member server configured for import
c. NT Workstation configured for import
d. Win 95 Clients configured for import
(ans a,b,c)
21. You install a printer on you NT 4.0 server, you want to use it as a network printer. In your network there are NT 4.0 and NT 3.51 clients, what drivers should you install.
a. a driver for each platform and NT version
b. only driver for 3.51
c. the driver for NT4.0 only
d. drivers will automatically work
(ans a)
22. How can you ensure that logon scripts match on PDC and BDC
a. just copy them to each server
b. replication of servers
c. synchronize the BDC with the PBC every time you change the logon scripts.
(ans b)
23. You want to allow only administrators to log on to the domain from a domain controller.
a. on your domain controller, refuse members of the group interactive to log on locally
b. remove all members except admins from the interactive group
c. allow only admins to log on locally
(ans c)
24. Remote users complain that they are disconnected when remote acessing the server, after enabling logging in the registy which file would you view,
a. Modem.log
b. Device.log
c. System.log
d. PPP.log
(ans d - check this one)
25. You install TCP/IP in a non-routed network, what else must you configure,
a. subnet mask
b. default gateway
c. WINS
d. DHCP
(ans a)
26. RAS server allows remote clients to dial in using NetBEUI and TCP/IP, what can remote clients access,
a. NetBIOS applications
b. Winsock applications
c. IPX/SPX applications
d. local resources on ras server
(ans a,b,d)
27. You are monitoring 5 servers from you NT workstation, you want to be notified when disk space on 5 servers is less than 25%, how to setup,
a. set up alert on each server
b. set up 5 alert counters for each server on your workstation
28. You want to migrate a Novell server to NT, what needs to be installed on the NT server,
a. FPNW
b. GSNW
c. RIP for IPX/SPX
d. NWLink protocol
(ans b)
29. Which can be configured for an export server
a. NT workstation
b. NT member server
c. Windows 95
d. Windows 3.1
e.NT domain contoller server
(ans b,e)
30. You have 2 netware servers and 100 netware clients, you want to add an NT server with SQL resources, you make the NT server a member of the netware domain, what next,
a. you create a local group on the member server, place the users in the global group then global into the local group
b. create a global group on the member server, place users into local group, then local into global,
c. create a local group on the domain, place users into global group, then global into local
d. none of the above, you only need NWLink
(ans d)
31. What do you use to administer a network shared printer from a Win 95 client running network admin tools
a. explorer
b. Control Panel
c. server manager
(ans c - check this one)
32. You have two printers that you want to configure as a printer pool on an NT server. Which of the following is true of creating the printer pool?
All print devices must be attached to the server.
All print devices must use the DLC protocol.
All print devices must be configured to use the same printer driver.
All print devices must be attached to the same physical port.
33. Your users are complaining that their print jobs are not being printed. You determine that the printer has stalled while printing a document. How can you clear the printer of the stalled document?
Pause the printer.
Stop and start the Spooler service.
Use Server Manager to clear the printer.
Use User Manager to clear the printer.
34. You are installing an NT server from a machine running DOS. You have a non-SCSI CDROM, which NT is unable to detect. How can you install the NT server?
Use the NT setup disks
Use the NT setup disks, and at the command prompt select to install the unsuppor
ted CDROM
Run WINNT /s
Run WINNT32 /w
35. You have a network consisting of NT servers and NetWare servers. Your NetWare clients are using a Visual Basic application that access a SQL database on one of the NT servers. What else must you install on the NT server containing the database so that your NetWare clients can access it?
Install Gateway Services for NetWare
Install NWLink
Install the Client Services for NetWare
Install TCP/IP
36. You have a network consisting of NT servers and NetWare servers. You are installing a new NT server and want to allow your Microsoft clients to have occasional access to one of the NetWare Servers. What else must you install on the NT server?
Install Gateway Services for NetWare
Install NWLink
Install the Client Services for NetWare
Install TCP/IP
37. You have installed Gateway Services for NetWare so that your Microsoft clients can have access to resources on NetWare servers. What else must you do on the NetWare server so that users can access resources?
Create a user account named NTGATEWAY and assign it appropriate permissions Install TCP/IP
Create a group named NTGATEWAY and assign it appropriate permissions
Create a NetWare accessible volume on the NT server
38. Several users are trying to connect to a RAS server on your network, but they are getting disconnected as soon as they dial in. What step would you take to troubleshoot the problem?
Modify the Registry to create a device.log file
Use User Manager to monitor client connections
Use Server Manager to monitor client connections
Use the Remote Access Admin tool to monitor the ports on the RAS server.
39. You are on a Windows95 client with the client network administration tools installed. You want to manage file permissions from this Win95 client. Which tool do you use?
User Manager for Domains
Server Manager
Windows Explorer
The Network option in Control Panel
40. You are on a Windows95 client with the client network administration tools installed. You want to manage printers connected to remote NT servers from this Win95 client. Which tool do you use?
User Manager for Domains
Server Manager
Windows Explorer
The Network option in Control Panel
41. You have several files located in a directory on an NTFS partition. The Everyone group has Read permission to the files. You copy the files to a new directory on a FAT partition. What happens to the permission on the files?
The permissions are inherited from the new directory
The permissions remain the same
The permissions are lost
The permissions must be reassigned after being copied to the FAT partition
42. You move a file from one directory to another on the same NTFS partition. What happens to the permissions on the file?
The permissions are inherited from the new directory
The permissions remain the same
The permissions are lost
The permissions must be reassigned after being copied to the FAT partition
43. You move a file from a directory on one NTFS partition to another directory on a different NTFS partition. What happens to the permissions on the file?
The permissions are inherited from the new directory
The permissions remain the same
The permissions are lost
The permissions must be reassigned after being copied to the FAT partition
44. You are installing TCP/IP on two computers located on the same subnet. You assign each computer a unique IP address. What additional information must you supply?
Default gateway
Subnet mask
Wins server
DHCP server
45. You are installing a DHCP server. What TCP/IP related components can you specify for your clients? (select all that apply)
Default gateway
WINS server
DNS server
FTP server
Subnet mask
46. Bob is a user on your NT network, and he wants a home directory so he can store some files. How do you give Bob a home directory?
Use User Manager for Domains and specify a UNC path to the home directory for Bob's account Use Server Manager and specify a UNC path to the home directory for Bob's account
Use User Manager for Domains and specify the domain name, server name, and share name for Bob's home directory.
Use the Network option in Control Panel
47. You have two disk drives and two disk controllers. You want to implement fault tolerance so that if any disk component fails, users will not be affected. Which fault tolerance feature should you implement?
Disk Striping
Disk Striping with parity
Disk Duplexing
Disk bogus answer
48. You have 6 SCSI drives configured as a stripe set with parity. One of the drives fails, and you replace it. What must you do to recover the failed drive?
Using Disk Administrator, select the new drive and choose Regenerate from the Fault Tolerance menu Using Disk Administrator, create a new partition on the new drive and then choose Regenerate from the Fault Tolerance menu Do nothing. The new driver will automatically be recovered Use Server Manager to regenerate the new drive
49. You have a client computer that is dialing in to your RAS server. The client computer is only capable of DES security encryption. Which option should you select when configuring the RAS server network configuration? (Look at the screen shot on pg. 354 of the Core Technologies material)
In the Encryption settings, select Require encrypted authentication
In the Encryption settings, select Require Microsoft encrypted authentication
In the Encryption settings, select Allow any authentication including clear text
Disable the DES security on the client computer
50: You are installing a RAS server and want your clients to determine their own security encryption. Which option should you select when configuring the RAS server? (Look at the screen shot on pg. 354 of the Core Technologies material)
In the Encryption settings, select Require encrypted authentication
In the Encryption settings, select Require Microsoft encrypted authentication
In the Encryption settings, select Allow any authentication including clear text
Disable the DES security on the client computer
51: You have a customer database located on an NTFS partition. The Accounting group has No Access permission to the database. The Managers group has Full Control permission. Maria is a member of the Accounting group, but she just got promoted to a manager. You add Maria's account to the Managers group, but she complains that she is still unable to access the database. What do you do?
Remove Maria's account from the Accounting group
Instruct Maria to log off and back on
Delete the Managers group and recreate it
Assign Full Control permission directly to Maria's account
52: Your NT server's performance has been declining. You determine that excessive paging is the problem. What can you do to increase performance?
Increase the size of the page file
Decrease the size of the page file
Add more memory
Use the System option in Control Panel
53: Which NT Performance Monitor counter would you monitor to determine if excessive paging is the cause of decreased performance?
Memory
Disk
Processor
UDP
54: You want to monitor TCP/IP on several servers in your domain from an NT Workstation computer. What must you do?
Install SNMP on the NT Workstation computer
Install SNMP on each of the servers to be monitored
Install the client-based administration tools on the NT Workstation
Another bogus answer
55: You are using performance monitor to monitor several NT servers, and you notice that performance on your workstation has been declining. You want to increase performance of your other applications while you monitor the servers. What must you do?
Use the System option in Control Panel to decrease the priority of the foreground applications
Use the System option in Control Panel to increase the priority of the foreground applications
Use the START command to start Performance Monitor at a higher priority Lower the Performance Monitor update interval
56. Your company has a central office and several remote locations connected by IP routers. Your clients, who are running NT Workstation, access local resources 90% of the time and remote resources 10% of the time. The clients use NetBEUI to access local resources and TCP/IP to access the remote resources. How can you optimize performance so that the clients can access all resources as fast as possible?
Configure the bindings for the Workstation service on all of the servers so that NetBEUI is first and TCP/IP is last.
Configure the bindings for the Workstation service on all of the clients so that NetBEUI is first and TCP/IP is last.
Configure the bindings for the Server service on all of the servers so that NetBEUI is first and TCP/IP is last.
Configure the bindings for the Workstation service on all of the servers so that
TCP/IP is first and NetBEUI is last.
57: You want to convert a FAT partition to NTFS. What utility do you use?
Disk Administrator
Server Manager
CONVERT.EXE
User Manager
上一篇文章: 微软认证模拟试题：IE4.0考题(2) 下一篇文章: MCSE微软系统工程师考试-NT Server 4.0 试题 2
相关文章:
相关软件: