MCSE习题——NT Server（1）
添加时间: 2007-4-8 3:33:05 作者: 微软认证参考 阅读次数:66 来源: http://www.d9soft.com
Windows NT Server 4.0
1.
By using Performance Monitor, you learn that your Windows NT Server computer
is running slowly because of excessive paging. How should you correct this
problem?
A. Increase the size of paging file.
B. Decrease the size of paging file.
C. Add memory to the computer.
D. Install a faster processor.
2.
You want to view counters for TCP/IP activity on three Windows NT Server
computers. You will run Performance Monitor on a Windows NT Workstation
computer to view this information.
What must you do before you can view these counters?
A. Install the SNMP service on each of the Windows NT Server computers.
B. Install the SNMP service on the Windows NT Workstation computer.
C. Create a log file on TCP/IP performance counters.
D. Create a report on TCP/IP performance counters.
3.
You notice that response on one of the Windows NT Server computers on your
network is poor. The server has two 2-GB hard disks, each with two 1-GB
NTFS partitions. The paging file is on the first physical disk, which also
contains the system partition.
What should you do to improve disk performance on the server?
A. Increase the size of the paging file.
B. Decrease the size of the paging file.
C. Move the paging file to the second physical disk.
D. Move the paging file to a different partition on the first physical disk.
4.
Your network is configured as a single domain and has five Windows NT Server
computers. You want to use Performance Monitor to analysize disk activity
for a week to determine overall utilization at peak periods on each of the
servers.
How should you collect the data?
A. Create an alert log.
B. Use the Report view
C. Use the chart view.
D. Create a log file.
5.
You want to increase the performance of a Windows NT Server computer. There
are usually 10 or fewer simultaneous connections.
Which Windows NT Server setting should you configure?
A. Workstation service
B. Server service
C. virtual memory
D. foreground application performance.
6.
Your netwok has three Windows NT Server computers. You want to be able to
monitor disk-space usage on each server so that you will be notified when
free space on any partition falls below 25 percent.
How can you do this?
A. On each server, use Server Manager to add your computer name or user name
to the list of names that alerts should be sent to.
B. On each server, use Server Manager to start the Alerter service. Change
the startup parameters so that your account names is specified as the logon
name for the Alerter service.
C. On your computer, use Performance Monitor to create an alert on the
% Free Space counter for each logical disk on each server.
D. On one server, start the Schedule service. Use the AT command to start
the Diskperf utility at desired intervals.
7.
You run Performance Monitor on a Windows NT Workstation computer to view
memory and disk counters on 10 Windows NT Server computers. You notice that
your workstation performs poorly because of the demands of tracking many
counters.
You want to increase the performance for the tasks you are runnung while
collecting this information. How should you do this?
A. Use the System Properties dialog box to decrease the performance setting
for foreground applications.
B. Run Performance Monitor from the command line with the START command to
give Performance Monitor high priority.
C. Start the Diskperf utility to create a larger data-collection cache.
D. Increase the time interval for data collection.
8.
You suspect that excessive paging resulting from a lack of memory is causing
slow performance on a Windows NT Server computer. You want to use Performance
Monitor to confirm your suspicion.
Which activity should you monitor?
A. the number of pages per second on the server
B. the percentage of physical disk activity
C. the percentage of the paging file that is in use
D. the peak percentage of the paging file that is in use.
9.
You want to migrate the files and user accounts from a NetWare server to a
Windows NT Server computer.
What must you install on the Windows NT Server computer before you can
perform the migration?
A. FTP
B. RIP for NWLink IPX/SPX Compatible Transport
C. Gateway Service for NetWare
D. SAP Agent
10.
Client computers on your network are Microsoft Windows 95 and Microsoft
MS-DOS-based computers. All of the client computers use Client for Microsoft
Networks and NWLink IPX/SPX Compatible Transport. Users at all client
computers must have access to data stored on Windows NT Server computers and
NetWare servers.
What should you install on the Windows NT Server computers to provide this
access?
A. Migration Tool for NetWare
B. NWLink IPX/SPX Compatible Transport
C. Gateway Service for NetWare
D. RIP for NWLink IPX/SPX Compitable Transport
**11.
You configure your RAS server to use DHCP to assign TCP/IP addresses. The
Windows NT Workstation computers are configured to recieve IP addresses from
the server.
Which additional configuration setting or settings for the workstation can
you manage over your network by using DHCP? (choose all that apply.)
A. default gateway address
B. default FTP server address
C. DNS address
D. WINS server address
E. mail server address
12.
Remote users will dial in to your RAS server by using Microsoft Windows 95
and third-party PPP client software. The third-party software supports only
theDES encryption algorithm for logon authentication. You want to provide
the highest possible level of logon authentication security.
Which type of authentication should you require?
A. Microsoft encrypted authentication
B. encrypted authentication
C. any authentication including clear text
D. data encryption
13.
Your existing network consists of 2 NetWare servers and 100 NetWare client
computers. You add a Windows NT Server computer to the network. It has a
Microsoft SQL Server database installed on it. You want the NetWare client
computers to be able to access the SQL Server database.
What must you install on the Windows NT Server computer?
A. NWLink IPX/SPX Compatible Transport
B. Gateway Service for NetWare
C. Migration Tool for NetWare
D. RIP for NWLink IPX/SPX Compatible Transport
15.
You install Gateway Service for NetWare on a Windows NT Server computer. You
want to enable the gateway.
What must you do?
A. You must create a user account named Ntgateway on the NetWare server. The
user account must have rights for the resource you want to access.
B. You must create a user account named Ntgateway on the Windows NT Server
computer. The user account must have rights to the gateway share names.
C. You must create a group named Ntgateway on the NetWare server. The group
must have rights for the resources you want to access.
D. You must create a group named Ntgateway on the Windows NT Server computer.
The group must have rights to the gateway share names.
上一篇文章: 70-210试题（六） 下一篇文章: 微软认证模拟试题：IE4.0考题(1)
相关文章:
相关软件: