MCSE习题——NT Server（7）
添加时间: 2007-4-8 3:42:07 作者: 微软认证参考 阅读次数:72 来源: http://www.d9soft.com
31.
You configure a Windows NT Server computer with NWLink IPX/SPX Compatible
Transport. Which resource on this server can be accessed by a user at a
NetWare client computer?
A. any shared directory that the user of the NetWare computer has rights to
B. any shared printer that the user of the NetWare computer has rights to
C. any client/server application that support NetBIOS
D. No resource on the Windows NT Server computer can be accessed by a user
at a NetWare client computer
32.
Your network has five Windows NT Server computers, which are located on
three different subnets. Users of remote Windows NT Workstation computers
use Dial-up Networking to connect to the network. You want to minimize the
time it take for these workstation to resolve NetBIOS names.
How can you do this?
A. Use a local Lmhosts file on each Windows NT Workstation computer.
B. Disable the NetBIOS interface on each Windows NT Workstation computer.
C. Use an Lmhosts file on the RAS server.
D. Install the WINS service on each Windows NT Workstation computer.
33.
The NetWare 3.x server at your branch office will be moved to the network at
corporate headquarters. The headquarters network has 1 Windows NT Server
computer and 60 Microsoft Windows 95 workstations. The headquarters
workstations use Client for Microsoft Networks.
You want all headquarters workstations to have access to files and printers
on both the NetWare server and the Windows NT Server computer. How should
you set up your Windows NT Server computer and your Windows 95 workstations?
A. Install and configure Gateway Service for NetWare on the Windows NT Server
computer. No additional software is required on the Windows 95 workstations
.
B. Install and configure Gateway Service for NetWare on the Windows NT Server
computer. Reconfigure the Windows 95 Workstations to use Client for NetWare
Networks only.
C. Install and configure MWLink IPX/SPX Compatible Tranport on the Windows NT
Server computer. Reconfigure the Windows 95 workstations to use Client for
NetWare Networks only.
D. Install and configure MWLink IPX/SPX Compatible Tranport on the Windows
NT Server computer. No additional software is required on the Windows 95
workstations.
34.
Your Micorsoft Windows 95 client computers access shared resources on a
Windows NT Server computer. The Windows 95 computers have Client for
Microsoft Networks installed. You want to allow the Windows 95 client
computers to access files on a NetWare server.
You install Gateway Service for NetWare on the Windows NT Server computer.
What else should you do on the Windows NT Server computer to allow the
Windows 95 client computers to access files on the NetWare server?
A. From Windows NT Exploror, use the Map Network Drive button to connect a
drive to the NetWare server. Then share that mapped drive.
B. From Server Manager, use the Shared Directories option on the Computer
menu to share the desired directories on the NetWare server.
C. From the Gateway Service for NetWare option in Control Panel, use the
Gateway option to share the desired directories on the NetWare server.
D. From the Manager for Domains, use the Logon To option in the User
Properties dialog box to allow the Windows 95 client computers to access the
NetWare server.
36.
You are the administrator of three networks in seperate locations. You
administer these networks remotely by dialing in via Dial-Up Networking from
your Windows NT Workstation computer. You want tobe able to use the RAS
AutoDial feature to automatically connect to each RAS server, based on the
UNC name or DNS name of a remote resource on the server.
What must you do on your Windows NT Workstation computer to use AutoDial?
A. Install theDNS service.
B. Install a null modem adapter.
C. Configure the workstation with SLIP.
D. Create a phone book entry for each RAS server you want to use.
E. Create an Lmhosts file that maps DNS names to IP addresses.
37.
You want to migrate the files and user accounts from a NetWare server to a
Windows NT Server computer.
What must you install on the Windows NT Server computer before you can
perform the migration?
A. FTP
B. RIP for NWLink IPX/SPX Compatible Transport
C. Gateway Service for NetWare
D. SAP Agent
38.
By using Performance Monitor, you learn that your Windows NT Server computer
is running slowly because of excessive paging. How should you correct this
problem?
A. Increase the size of paging file.
B. Decrease the size of paging file.
C. Add memory to the computer.
D. Install a faster processor.
39.
You run Performance Monitor on a Windows NT Workstation computer to view
memory and disk counters on 10 Windows NT Server computers. You notice that
your workstation performs poorly because of the demands of tracking many
counters.
You want to increase the performance for the tasks you are runnung while
collecting this information. How should you do this?
A. Use the System Properties dialog box to decrease the performance setting
for foreground applications.
B. Run Performance Monitor from the command line with the START command to
give Performance Monitor high priority.
C. Start the Diskperf utility to create a larger data-collection cache.
D. Increase the time interval for data collection.
40.
A Windows NT Server computer performs a variety of I/O transactions. The
server has five physical disks, each with two partitions.
How should you configure the paging file for optimal performance?
A. Place the paging file on the disk that contains the system files.
B. Place the paging file on any partition other than the boot partition.
C. Distribute the paging file equally among all the logical partitions,
except on the disk that contains the system files.
D. Distribute the paging file equally among all the physical partitions,
except disk that contains the boot and system files.
41.
Your network is configured as a single domain and has five Windows NT Server
computers. You want to use Performance Monitor to analysize disk activity
for a week to determine overall utilization at peak periods on each of the
servers.
How should you collect the data?
A. Create an alert log.
B. Use the Report view
C. Use the chart view.
D. Create a log file.
42.
Your network has three Windows NT Server computers. You want to be able to
monitor disk-space usage on each server so that you will be notified when
free space on any partition fails below 25 percent.
How can you do this?
A. On each server, use Server Manager to add your computer name or user name
to the list of names that alerts should be sent to.
B. On each server, use Server Manager to start the Alert service. Change the
startup parameters so that your account name is specified as the logon name
for the Alerter service.
C. On your computer, use Performance Monitor to create an alert on the
% Free Space counter for each logical disk on each server.
D. On one server, start the Schedule service. Use the AT command to start
the Diskperf utility at desired intervals.
43.
You suspect that excessive paging resulting from a lack of memory is causing
slow performance on a Windows NT Server computer. You want to use Performance
Monitor to confirm your suspicion.
Which activity should you monitor?
A. the number of pages per second on the server
B. the percentage of physical disk activity
C. the percentage of the paging file that is in use
D. the peak percentage of the paging file that is in use.
**44.
The paging activity has increased on your Windows NT Server computer. As a
result, the operating system has expanded the paging file beyond the
specified initial paging size.
How can this affect the operating system? (Choose two)
A. Applications can take longer to start.
B. Network I/O can be increased.
C. The disk containing the paging file can become fragmented.
D. The current content of hte paging file can be lost.
45.
You want to view counters for TCP/IP activity on three Windows NT Server
computers. You will run Performance Monitor on a Windows NT Workstation
computer to view this information.
What must you do before you can view these counters?
A. Install the SNMP service on each of the Windows NT Server computers.
B. Install the SNMP service on the Windows NT Workstation computer.
C. Create a log file on TCP/IP performance counters.
D. Create a report on TCP/IP performance counters.
上一篇文章: MCSE习题——NT Server（8） 下一篇文章: MCSE习题——NT Server（6）
相关文章: