MCSE习题——NT Server（4）
添加时间: 2007-4-8 3:45:30 作者: 微软认证参考 阅读次数:166 来源: http://www.d9soft.com
46.
Your network has one PDC and three member servers. You want users to be
able to log on to the domain if the PDC fails.
How should you configure the network?
A. Promote one of the member servers to become a BDC.
B. Promote one of the member servers to become a PDC.
C. Reinstall Windows NT Server on one of the member servers.
Configure that server as a BDC.
D. Reinstall Windows NT Server on one of the member servers.
Configure that server as a PDC.
48.
You create a new partition by using Disk Administrator. What must you do
before you can format the new partition?
A. From the Partition menu in Disk Administrator, select Commit Changes Now.
B. From the Partition menu in Disk Administrator, select Configuration and
then select Save.
C. From the Partition menu in Disk Administrator, select Mark Active.
D. Restart the computer.
49.
You are installing Windows NT Server on an intel-based computer from a
CD-ROM. The Windows NT installation program fails to detect your non-SCSI
CD-ROM drive.
How can you enable the Windows NT installation program to recongnize your
non-SCSI CD-ROM drive?
A. Restart the Windows NT installation program.
Select Specify additional device and manully select the driver for the
CD-ROM adapter.
B. Restart the Windows NT installation program.
Select Scan system for mass storage devices.
C. Insert the Windows NT Setup boot disk.
From the command line, type Winnt/s.
D. Insert the Windows NT Setup boot disk.
From the command line, type Ntdetect.com.
50.
Your Windows NT Server computer has a SCSI adapter. You install a second
SCSI adapter so that you can do disk duplexing. The new SCSI adapter does
not have its BIOS enabled.
You want to make a boot disk that will allow you to start your computer by
using the second SCSI adapter if the first one fails. Which file must you
include on the boot disk to support the second SCSI adapter?
A. Bootsect.dos
B. Ntbootdd.sys
C. Scsi.inf
D. Ntfs.sys
**51.
You want to install Windows NT Server by using the Windows NT Server CD-ROM.
How can you do this? (Choose all that apply.)
A. Boot from the CD-ROM.
Run Setup.exe.
B. Boot from Microsoft MS-DOS.
Verify that the required MS-DOS CD-ROM drivers are loaded.
Run Setup.exe from the CD-ROM.
C. Boot from Microsoft MS-DOS.
Verify that the required MS-DOS CD-ROM drivers are loaded.
Run Winnt.exe/b from the CD-ROM.
D. Boot from Microsoft MS-DOS.
Verify that the required MS-DOS CD-ROM drivers are loaded.
Run Winnt32.exe/b from the CD-ROM.
E. Boot from the Setup boot disk.
52.
You attach an external tape drive to your Windows NT Server computer. The
tape drive reqiures a SCSI controller, which you also install.
What must you do to aloow the new tape drive and the SCSI controller to
work with the server? (Choose all that apply.)
A. Install the appropriate device driver for the SCSI controller.
B. Install the appropriate device driver for the tape device.
C. Install the Windows NT Backup program.
D. Restart the server.
E. Start the SCSI controller by using the SCSI Adapter option in Control
Panel.
53.
Your network consists of 1 Windows NT Server computer and 100 Windows NT
Workstation computers. The network uses TCP/IP. The server has 2 network
adapters, each attched to a separate LAN segment. You want to configure the
server to support routing across the 2 segments.
How should you configure the addresses of the network adapters?
A. Manually assign a unique IP address to each network adapter.
B. Manually assign an identical IP address to both network adapters.
C. Use DHCP to assign a unique IP address to each network adapter.
D. Use DHCP to assign identical IP address to both network adapters.
54.
Your Windows NT Server computer contains one physical disk, which is divided
into two logical partitions. The first partition, drive C, contains the
boot files and the system files and is formatted with FAT. The second
partition, drive D, is formatted with NTFS.
You want to convert the first partition, drive C, to NTFS without loss of
data. How can you do this?
A. Use Windows NT Explorer to copy all the files from drive C to a directory
on drive D.
Format drive C with NTFS and copy the files back to drive C.
B. Use Windows NT Explorer to copy all the files from drive C to a directory
on drive D.
Delete the C partition and re-create it.
Format drive C with NTFS and copy the file back to drive C.
C. Use the TOOLS option in Disk Administrator to change the format of drive
C to NTFS.
D. Use the Convert utility from the command line to convert drive C to NTFS.
55.
You want to install Windows NT Server on a Microsoft MS-DOS-based computer
by using the network.The Windows NT Server installation files are
available on a shared directory on a Windows NT Server computer named CF1.
What must you do to start the installation?
A. Boot the MS-DOS-based computer from the Windows NT Server Setup boot disk.
B. On CF1, use Network Client Adminstrator to create a Windows NT Server
network installation startup disk.
Boot the MS-DOS-based computer from MS-DOS.
Insert the disk and run Winnt.exe from the disk.
C. Boot the MS-DOS-based computer from MS-DOS.
Connect to the shared drive that contains the Windows NT Server
installation files.
Run Winnt32.exe from that shared drive.
D. Boot the MS-DOS-based computer from MS-DOS.
Connect to the shared drive that contains the Windows NT Server
installation files.
Run Winnt.exe from that shared drive.
56.
You run Performance Monitor on a Windows NT Workstation computer to view
memory and disk counters on 10 Windows NT Server computers. You notice that
your workstation performs poorly because of the demands of tracking many
counters.
You want to increase the performance for the tasks you are running while
collecting this information. How should you do this?
A. Use the System Properties dialog box to decrease the application
performance setting for forgroud applications.
B. Run Performance Monitor from the command line with the START command to
give Performance Monitor high priority.
C. Start the Diskperf utility to create a larger data-collection cache.
D. Increase the time interval for data collection.
上一篇文章: MCSE习题——NT Server（5） 下一篇文章: 70-210试题（一）
相关文章: