70-210 考题回忆(1)
添加时间: 2007-4-2 1:05:09 作者: 微软认证参考 阅读次数:69 来源: http://www.d9soft.com
You want to upgrade 150 computers from wks4 to 2000 pro. You create a unattent.txt file by using setup manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the windows 2000 professional CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do?
A. Add a {data} section to aunattenD.txt, and set the unattended install Parameter to YES.
B. Add an {Un-attend} section to unattenD.txt, and set the OEMP reinstall parameter to Yes.
C. Rename unattend.txt on the floppy disk to winnt.sif***
D. Create a $oem$$1 folder on the hard disk of the test computer, and copy unattenD.txt to the folder.
Also got a drag and drop.You are the administrator of your company network. A user named Peter runs Windows 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables Offline Files.Peter calls you from home and reports that copies of his folders and files on the network are not
available on his portable computer. What should you instruct Peter to do?
A. Enable file and print sharing, Peter will be able to access his files at home
immediately
B. Synchronize all offline files, Peter will be able to access his files at home
immediately
C. At the office, make all files available offline, Peter will be able to access his files the next time he logs off the network
D. At the Office, create a shortcut to the Offline Files folder, Peter will be able to access his files the next time he logs off the network
Answer: C
5. You are the administrator of your company's network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98.You want to configure the computers in the software department so that users can use bothWindows 98 and Windows 2000 Professional during the project. You also want to ensure that thecomputers are configures for optimal disk performance. In addition, you want to ensure that users in the software department can access all of the files on their computers while using either operating system. What should you do?
A. Create and format a FAT32 Partition
B. Create and format an NTFS volume
C. Configure Windows 2000 Professional to enable disk compression
D. Configure Windows 2000 Professional to implement dynamic volumes
Answer: A
8. You upgrade six MPS-compliant computers from Windows NT Workstation 4 0 to Windows 2000 Professional. Each computer has two 550 MHz processors. The computers are used for high end graphics applications that require exceptional performance After the upgrade users report that the processing time for the graphics applications is much slower. What should you do?
A. use Device Manager to enable the AGP Bridge Controller
B. use Device Manager to install the MPS-compliant drivers for the second processor
C. use Device Manager to install the ACPI-compliant drivers for the second processor
D. During startup, press F8, and install the MPS-compliant drivers for the second
processor
Answer: B.
9. You install Windows 2000 Professional on 10 computers that have video capture cards Installed. A user named Lilly reports that her video capture card is not functioning correctly. She wants to use her video capturing software to capture video frames but she cannot view the video output You use Device Manager to view the hardware settings on Lilly a computer as shown in the exhibit(Click the Exhibit button)You want Lilly to be able to capture video frames by using the video capture card. What should you
do?
A. use System in Control Panel to enable the device
B. use Device Manager to update the drivers for the device
C. Move the video capture card to a different PCI slot
D. Uninstall the device and disable Plug and Play detection for the device
Answer: B
10. You install Windows 2000 Professional on your Portable computer. You use a docking station for your Portable computer when you are in the office
You install an ISA-based SCSI adapter in your docking station. You Insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do?
A. Restart the Add/Remove Hardware wizard Manually add the SCSI adapter drivers
B. Restart the computer in safe mode Restart the Add/Remove Hardware wizard to detect the SCSI adapter
C. Configure Windows 2000 Professional to use driver signing Restart the Add/Remove Hardware wizard to detect the SCSI adapter
D. Copy the SCSI adapter drivers to the WinntDriver Cachei386 folder Restart the Add/Remove Hardware wizard to detect the SCSI adapter
Answer: A
11. You are the administrator of a Windows 2000 network. The network is configured as shown in the exhibit (Click the Exhibit button)
Computers on the Sales subnet run Windows 2000 Professional. These computers are dynamically assigned IP addressing and configuration information from a DHCP server on the subnet.Computers on the Development subnet run Windows 98. These computers are statically assigned IP addressing and configuration information.users on the Sales subnet report that they cannot communicate with users on the Development subnet A user who works on Computer3 reports that he cannot communicate with computers on
either subnet. You want all users to be able to communicate with other users on both subnets.What should you do? (Choose two)
A. Change the frame type to 802.2 on Computer3
B. Change the default gateway option IP address on the DHCP server
C. Change the default protocol on the computers on the Sales subnet to NWLink
IPX/SPX/NETBIOS Compatible Transport Protocol
D. Enable TCP/IP protocol with the default settings on Computer3
E. Add the NETBEUI protocol to the binding order on all client computers
Answer: B,D
You install Windows 2000 Professional on your portable computer. Your computer has a built in10MB Ethernet adapter. You then install a 100 MB Ethernet PC Card adapter.When the installation is complete, you notice that the 100MB Ethernet PC Card adapter is not functioning. You use Computer Management to view the network adapters in your computer.Device Manager shows that the 10 MB Ethernet adapter and the 100 MB Ethernet PC Card adapter are conflicting with each otherYou want to configure Windows 2000 Professional to USB only the 100 MB Ethernet PC Card
adapter. What should you do?
A. Remove the 10 MB Ethernet adapter driver by using Device Manager
B. Remove the drivers for both Ethernet adapters by using Device Manager
C. Install the 100 MB Ethernet adapter in a different PC Card slot
D. Disable the device for the 10 MB Ethernet adapter by using Device Manager
Answer: D
15. A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2 MB to 1 MB. You want to copy one of the compressed bitmap files from your hard disk to a 1.4 MB floppy disk.When you attempt to copy the file you receive the following error message Destination drive is full.What should you do?
A. Move rather than copy the compressed bitmap file to the floppy disk
B. Reformat the floppy disk Then copy the compressed bitmap file to the floppy disk
C. Use another program to compress the bitmap file before copying it to the floppy
disk
D. Copy an empty compressed folder to the floppy disk. Then copy the compressed
bitmap file to a folder on the floppy disk
Answer: C
16. You are the administrator of a small server-based network. You are installing Windows 2000 Professional on nine computers. You configure the network adapter card for each computer to use TCP/IP and assign static IP addressing information.
During the installation, Setup detects and installs a 10/100-Mbps UTP-only network adapter card on Computer6 and Computer8 and a 10 Mbps BNC/UTP combination network adapter card on the other seven computers. You accept the default settings for the network adapter cards and finish installing the network adapter cards. All computers are connected to 10/100 switch that has category 5 UTP cabling.After the installation you find that only Computer6 and Computer8 can communicate with each other. You want all nine computers on the network to be able to communicate with each other.
What should you do?
A. Configure the 10/100 switch to transmit only at the 100 Mbps rate
B. Configure the 10/100 Mobs network adapter cards to transmit at the 10 Mbps rate
C. Change the combination network adapter cards to use the BNC transceiver adding
D. Change the combination network adapter cards to use the UTP transceiver scone
Answer: D.
17. You are configuring your computer to use both Windows 2000 Professional and Windows 98. Your computer has three 6 GB hard disks Disk 0 Disk 1 and Disk 2. You want to configure each hard disk to have a 6 GB partition You want to install Windows 98 on Disk 0, and Windows 2000 Professional on Disk 1. You want to store your project files on Disk 2. You want to implement file level security on Disk 1. You want to be able to access your project files when using either operating system. What should you do?
Select and Place
A.disk0 fat32; disk1 ntfs; disk2 fat32
B.disk0 fat32; disk1 ntfs; disk2 fat16
C.disk0 fat32; disk1 ntfs; disk2 ntfs
D disk0 ntfs; disk1 ntfs; disk2 fat32
Answer: a
18. You encrypt three files to ensure the security of the files. You want to make a backup copy of the three files and maintain their security settings. You have the option of backing up to either the network or a floppy disk.What should you do?
A. Copy the files to a network share on an NTFS volume. Do nothing further
B. Copy the files to a network share on a FAT32 volume. Do nothing further
C. Copy the files to a floppy disk that has been formatted by using Windows 2000
Professional. Do nothing further
D. Place the files in an encrypted folder. Then copy the folder to a floppy disk
Answer: A
19. You are the administrator of your company network. You purchase 75 new Windows 2000 Professional computers that will be shared by users in the Graphics organizational unit (OU). All of the computers are configures identically.
You want users to be able to maintain their individual desktop settings regardless of which computer they USE You want to accomplish this with the least amount of administrative effort. What should you do?
A. Configure each computer to join a workgroup Create a user account and a local profile for each user
B. Configure each computer to join a workgroup Create a domain user account that uses roaming user profiles
C.Configure each computer to join the domain Create a user account for each user on a domain controller
D. Configure each computer to join the domain Create a domain user account that uses roaming user profiles
Answer: D
20. You are configuring a Windows 2000 Professional portable computer to use a dial up connection to connect to a Routing and Remote Access server. The computer has a smart card reader and the appropriate drivers installed. You use MMC to request a new certificate. You then install the certificate to the smart card. You
now want to use your smart card for authentication when you connect to the Routing and Remote Access server. You want to use the Advanced Security Settings dialog box as shown in the exhibit (Click the Exhibit button )
Which option or options should you enable in the Advanced Security Settings dialog box? (Choose all that apply)
A. use Extensible Authentication Protocol (EAP)
B. Unencrypted password (PAP)
C. Shiva Password Authentication Protocol (SPAP)
D. Challenge Handshake Authentication Protocol (CHAP)
E. Microsoft CHAP (MS-CHAP)
F. Microsoft CHAP Version 2 (MS-CHAR v2)
G. For MS-CHAP based protocols, automatically use MB Windows logon name and
password (and domain, if any)
Answer: A
21. You are the administrator of a Windows 2000 Professional computer. A user named Mand assists you in performing some administrative tasks. Mand is a member of the local Administrators group users report that Mand has been viewing and changing their files. You want Mand to be able to install programs perform backups and manage printers, but not to view or change other users files for which permission has not been granted you want to set up Mand account to have minimal rights and permissions. You want to accomplish this with the least amount of administrative effort.What should you do?
A. Leave Mand in the local Administrators group Limit her rights by using Local Policies
B. Leave Mand in the local Administrators group Change the NTFS permissions on other users files to deny Mand access
C. Remove Mand from the local Administrators group Add her to both the Power users group and the Backup Operators group
D. Remove Mand from the local Administrators group Add her to the Power users group Then grant her NTFS Read permission on the files to be backed up
Answer: C
22. You are the administrator of your company network. The dial up server on your network is configured to support certificate authentication.A user named Tom wants to use smart card authentication on his Windows 2000 Professional Portable computer. You verify that Tom computer has a PC Card smart card reader and the
appropriate drivers installed. You give Tom a smart card to use. What else should you do to enable smart card authentication on Tom computer?
A. Configure a dial up connection to use EAP Select the smart card device for authentication
B. Configure a dial up connection to use SPAP Select the smart card device for authentication
C. Configure a dial up connection to use certificate authentication Enable the user credentials for authentication
D. Configure a dial up connection to connect to a private network through the
Internet Enable L2TP to create a virtual private network (VPN) tunnel
Answer: A
23. You use a shared Windows 2000 Professional computer. You notice that some of your Microsoft Word documents that were on the local hard drive have been deleted. You restore the documents from a recent backup You want to be able to track all users who access your Word documents in the future. What should you do? (Choose two)
A. Enable the local Group Policy for auditing object access events that are
successful
B. Enable the local Group Policy for auditing object access events that are
unsuccessful
C. Enable the local Group Policy for auditing process tracking events that are
successful
D. Enable the local Group Policy for auditing process tracking events that are
unsuccessful
E. use Windows 2000 Explorer to enable auditing for your files
F. Run the diskped -V command, use System Monitor to examine the Logical I/O
counter. Restart the computer
Answer: A,E
24. You are the administrator of your company network. An employee named Mark is leaving the company. A new employee named Ene has been hired to replace him.
Mark has a local user account on a Windows 2000 Professional computer Mark has rights and permissions to multiple files and folders on the computer.You want Ene to have the same rights and permissions that Mark has. You want to ensure that
Mark will no longer have access to the files and folders on the computer. You want to accomplish this with the least amount of administrative effort. What should you do?
A. Rename Mark user account to Ene, and change the account password
B. Create Ene account by copying Mark a profile to Ene account
Delete Mark account
C. Create Ene account by copying Mark account Delete Mark account
D. Delete Mark account Add Ene account Add Ene to the same groups to which Mark belonged Grant Ene all the individual user rights and permissions that Mark had
Answer: A
25. You install a new AGP video adapter in your Windows 2000 Professional computer. You start the computer. You notice that the video display has retained the default settings of 640x480 resolution and 16 colors You install the manufacturer a device drivers for the new video adapter. You then restart the computer. During the startup process, the monitor goes blank. After several minutes, the screen is still blank. You restart the computer and experience the same problem again.You want to enable Windows 2000 Professional to start successfully. What should you do?
A. Start the computer in debug mode Restore the original adapter driver settings
B. Start the computer in safe mode Remove the AGP device by using Device Manager
C. Start the computer by using the Recovery Portable Remove the AGP driver
D. Start the computer by using the Emergency Repair Disk Restore the original adapter driver settings
Answer: B
26. You purchase a USB-based ISDN terminal adapter for your Windows 2000 Professional portable computer. You plug the device into the USB port. Plug and Play fails to detect the new device. You test the device on a Windows 2000 Professional desktop computer. You find that Plug and Play correctly detects the device. You then examine Device Manager on the portable computer as shown in the exhibit (Click the Exhibit button ) You want to resolve the problem so that you can use the ISDN terminal adapter on your portable computer. What should you do?
A. use Device Manager to enable the USB root hub in the current hardware profile
B. use Device Manager to enable the USB host controller in the current hardware
profile
C. Contact the hardware manufacturer to obtain an upgrade for the Plug and Play BIOS
D. Turn off the computer, plug in the ISDN terminal adapter and restart the computer
Answer: C
30. Your Windows 2000 Professional computer has 64 MB of RAM and two hard disk drives: drive C and drive D. Each hard disk has more than 500 MB of free disk space. Windows 2000 Professional is installed on drive C. You frequently run two or more memory intensive graphics applications simultaneously. You notice
that access to drive C is much slower when you are using the graphics applications.
You want to maximize disk performance. What should you do?
A. Configure the paging file on drive C to set the initial size of virtual memory and the maximum size of virtual memory to 64 MB
B. Configure the paging file on drive C to set the initial size of virtual memory and the maximum size of virtual memory to 128 MB
C. Move the paging file from drive C to drive D Set the initial size of virtual memory and the maximum size of virtual memory to 256 MB
D. Move the paging file from drive C to drive D Set the initial size of virtual memory to 64 MB and the maximum size of virtual memory to 256 MB
Answer: C
39. You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400 MHz Pentium III and has 128 MB of RAM and a 10 GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates that your computer is infected with a Master Boot Record virus. What should you do before you continue the installation?
A. Remove the virus checker in Windows 98
B. Disable the BIOS virus checker and restart the computer
C. Run fixmbr.exe from the Windows 2000 Professional CD-ROM
D. Modify the Boot.ini file to include a signature() parameter on the ARC path of
the system partiton
Answer: B
40. You are the administrator of a Windows 2000 Professional computer that is shared by several users in the sales department. User accounts have been created for current users. Current users can log on to the computer To accommodate new users you add two new user accounts named user7 and user8 to the computer. When user7 attempts to log on to the computer, she receives the following error message: Windows cannot copy file C:Documents and Settingsdefault user to location
C:Documents and Settingsuser7. Contact your network administrator. Detail Access is denied.When user8 attempts to log on to the computer he receives the same type of error message.You want to allow the two new users as well as other users in the sales department to be able tolog on to the computer.Which two methods can you use to accomplish your goal? (Choose two)
A. Add the user7 and user8 user accounts to the DACL for the Profiles shared folder
on the network server
B. Add the user7 and user8 user accounts to the DACL for the C:Documents and
Settingsdefault user folder
C. Add the Everyone group to the DACL for the C:Documents and Settingsdefault
user folder
D. Add a Group Policy object (GPO) for the Sales OU that redirects user profiles to
a shared folder
E. Log on by using the local Administrator account and create new folders for user7
and user8 in the c:documents and settings folder
Answer: CE
41. You are the administrator of your company's network. Your company is based in Russia and conducts the majority of its business in Russian. Users in your company create, view, and edit documents in English(US). French and Spanish to communicate with vendors internationally users run the Russian localized edition of Windows 2000 Professional on their desktop and portable computers. A user named Katrin wants to create a word processing document in both English and Spanish by using Notepad in Windows 2000 Professional. She requests your assistance
in enabling English and Spanish on her computer. What should you do?
A. Instruct Katrin to select the desired input locale for either English or
Spanish within Notepad
B. Instruct Katrin to select the input locale indicator on the taskbar and select
either English or Spanish
C. Instruct Katrin to use Regional Options in Control Panel to add input locales and keyboard layouts/IME for both English and Spanish
D. Create a Local Computer Policy for Katrin's computer to include both English
and Spanish
Answer: C
47.You install Windows 2000 Professional on a computer named Client2. The computer is configured to have a TCP/IP address of 10.10.167.4 and a default gateway of 10.10.167.1. The network is configured as shown in the Network Configuration exhibit (Click the Exhibit button ) You want to connect to a shared folder on ServerB. When you attempt to connect to the network share, you receive the following error message: The network location could not be reached. You run IPConfig to review the configuration as shown in the IP Configuration exhibit (Click the Exhibit button) You want to allow Client2 to connect to ServerB. What should you do?
A. Place Client2 on the same segment as ServerB
B. Place a computer running the WINS Proxy service on the same segment as Client2
C. Configure Client2 to use a default gateway of 10.10.13.1
D. Configure Client2 to use a DNS server address of 10.10.13.24
E. Configure Client2 to use a WINS server address of 10.10.13.24
Answer: E
48. You are the administrator of your company’s network. Your network consists of 20 Windows 2000 Professional computers. You want to configure all of the computers to allow access to the Internet Your budget does not allow for installing a permanent Internet connection for the network. You do have a single dial up account at a local Internet service provider (ISP) and a 56kbps modem. You want the computers to be able to access the Internet when Web resources are requested.
What should you do? (Choose all that apply)
A. Configure the shared modem to use software handshaking
B. Configure the dial up connection to enable on demand dialing
C. Configure the dial up connection to enable Internet Connection Sharing
D. Configure all of the other computers to have a dial up connection that uses the shared modem
E. Attach the modem to one of the Windows 2000 Professional computers and create a dial up connection to the ISP
F. Attach the modem to one of the Windows 2000 Professional computers and share the modem on the network
Answer: C
49. You are the administrator of your company’s network. A user named Paul in the sales department is working on a Windows 2000 Professional computer. Paul needs access to files that are in the Sales folder on his computer. A local group named Sales is granted Full Control permission to the Sales folder and the files within it. Paul is a member of the Sales local group but he cannot access the files that he needs. What
should you do?
A. Grant Paul NTFS permissions so that he can access any parent folders of the Sales folder
B. Share the Sales folder and grant Paul shared folder permissions to access the Sales folder
C. Remove Paul from any other groups that have been explicitly denied access tothe Sales folder
D. Delete the Sales local group and then recreate it. Add the individual user accounts from the sales department back into the Sales local group
Answer: C.
56.You are the administrator of your company a network. Your company has offices in HongKong ,Madrid, New York, Paris and Tokyo.A user named Carmen works in the New York office, but she often travels to the Madrid office.
Carmen uses the Multilanguage version of Windows 2000 Professional on her Console computer. She needs to be able to access both an English and Spanish user interface, input locale, and keyboard layout/IME. When Carmen is in the New York office, she logs on to the network by using the Carmen_eng user account. She is given the English user interface, input locale and keyboard layout/IME. When she is
in the Madrid office, she logs on to the network by using the Carmen_span user account. She is then given the Spanish user interface, input locale and keyboard layout/IME. Carmen reports that when she logs on to the network by using the Carmen_eng user account, she is not allowed to add any languages to her computer other than English (US), which is already installed.
What should you do?
A. Add the Spanish keyboard layout/IME for the Carmen_eng user account profile.
B. Add the English keyboard layout/IME for the Carmen_span user account profile.
C. Reconfigure the Group Policy object (GPO) for the Carmen_eng user account to
allow her to change languages on her computer.
D. Reconfigure the Group Policy object (GPO) for the Carmen_span user account to
allow her to change languages on her computer.
Answer: C
56.You are the administrator of a Windows 2000 network. You purchase 25 new portable computers that have a preinstalled version of Windows 98. You upgrade the 25 new computers to Windows 2000 Professional. You want to remove the Logoff option from the Start menu on the 25 new computers. Which two methods can you use to accomplish your goal? (Choose two)
A. On the Advanced tab of the Taskbar & Staid Menu dialog box, clear the
Displaylogoff option.
B. On the Advanced tab of the Taskbar & Staid Menu dialog box, clear the
Administrative Tools option.
C. On the General tab of the Taskbar & Staid Menu dialog box, clear the
Personalized Menus option. Log off and then log on to the computers.
D. Use a Local Computer Policy that will not include the Logoff option on the Start
menu.
E. Use the User Profiles tab within the properties of My Computer to change the
profile from a local profile to a roaming user profile.
Answer: AD
57.You are the administrator of your company a network. A user named Michael has limited dexterity, which prevents him from using the standard keyboard to complete his daily computing tasks. You.want to configure his Windows 2000 Professional computer to use the appropriate accessibility options.
You log on to Michael a computer by using Michael user account, which is a member of the local
Users group. You configure the StickyKeys, FilterKeys, and ToggleKeys options, You then log off.
Michael logs on to the computer by using his user account. Michael is able to use the accessibility
options that you have configured. However, when he returns from lunch, the accessibility options
are automatically turned off.
What should you do?
A. Use Accessibility Options in Control Panel to reconfigure the accessibility
idle time setting.
B. Use Accessibility Options in Control Panel to enable the FilterKeys option to
reconfigure the time setting.
C. Use Utility Manager to configure the accessibility options to start
automatically when Windows 2000 Professional loads.
D. Use Utility Manager to increase the accessibility idle time setting for
Michael’ s accessibility options, and save the settings.
Answer: A
58. You are the administrator of a Windows 2000 domain. You deploy a graphics software application tousers in the Graphics organizational unit (OU).
You want to create a custom installation for three users named Carlos, Carmen and Maria, who aremembers of the Graphics OU. You want these three users to be able to access additional text,filters, and other graphics options for the software.
What should you do?
A. Create the Graphic Users OU in the domainAdd a custom .msi file to the Graphics OU.
B. Create the Graphic Users OU in the domainAdd a custom .mst file to the Graphics OU.
C. Create the Advanced Software OU within the Graphics OU, and add Carlos, Carmen, and Maria.Create an. msi file, including changes, and apply the modifications to the Advanced Software OU.
D. Create the Advanced Software OU within the Graphics OU, and add Carlos, Carmen,and Maria, Create an. mst file, including changes, and apply the
modifications to the Advanced Software OU.
Answer: D
59. You are upgrading Computer1 and Computer2 from Windows NT Workstation 4.0 to Windows 2000Professional. You successfully upgrade Computer1. During the upgrade of Computer2, a series of power outages interrupts the upgrade.
You discover that the upgrade of Computer2 is incomplete. Furthermore you find that Computer2 can no longer run Windows NT Workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use Computer1 to help recover the failed upgrade. What should you do?
A. On Computer1 copy the CD-ROM driver and the system files named Ntdetect.com, Ntbootdd.sys, ntdll.dll, and Setupldr.bin to a formatted floppy disk.
On Computer2 restart the upgrade by using the floppy disk. Then run Winnt32 /debug from the Windows 2000 Professional CD-ROM.
B. On Computer1 copy the CD-ROM driver and the system files named Ntdetect.com, Ntbootdd.sys, ntdll.dll and Setupldr.bin to a formatted floppy disk.
On Computer2 restart the upgrade by using the floppy disk. Then run Winnt32/rx from the Windows 2000 Professional CD-ROM.
C. On Computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On Computer2 restart the upgrade by using the newly created floppy disks.
D. On Computer1 perform a remote installation from a network share.
On Computer2 when the text cough of Setup has completed, resume the
installation by using Setup Manager.
Answer: C#.
59. You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all of the new computers. The computers have several different configurations of hard disks and other hardware components. You install Windows 2000 Professional and the other standard software on one of the computers. You log on to the computer by using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy. You run Setup Manager and create the Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:Sysprep folder. You run Sysprep.eve and then run your third-party disk imaging software.You copy the image to several test computers and restart the computers. When the installation is
complete, you find that some of the computers do not function at all. You also find that the desktop settings do not appear as you had configured them on the original computer. You want to correct the imaging process and ensure that all computers have the same standard desktop. What should you do? (Choose two)
A. Copy Sysprep.inf to the C:Sysprep folder.
B. Copy the Administrator profile to the Default User profile. Then grant
permissions to the Everyone group to use the profile.
C. Include the -pnp parameter for Sysprep.exe when you rerun that utility.
D. Include the -nosidgen parameter for Sysprep.eve when you rerun that utility.
Answer: BC
60.You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.
You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on the remaining 40 computers. What should you do?
A. Configure the DHCP scope to add additional IP addresses
B. Run Rbfg.exe from the RemoteinstallAdmin folder on the RIS server
C. Modify the startup sequence in the CMOS of the remaining computers
D. Create computer accounts for the remaining computers in Active Directory
Answer: A
61. You are installing Windows 2000 Professional on a computer named Client2. The network is configured as shown in the exhibit (Click the Exhibit button )
Your network uses TCP/IP as the only network protocol. You configure Client2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.13.1 and a WINS server address of 10.10.13.10.ServerB is configured with TCP/IP. ServerB is the network WINS server You cannot connect to shared resources on ServerB and ServerC by using UNC names. You want Client2 to be able to connect to ServerB and ServerC. What should you do?
A. Configure Client2 to use a default gateway of 10.10.20.1
B. Configure Client2 to use a TCP/IP address of 10.10.13.234
C. Install a WINS server on the same segment as Client2
D. Install and configure a DNS server, and configure Client2 to use the DNS Server
Service
Answer: A
上一篇文章: The best 70-215 dump(1) 下一篇文章: 70-219 考题中文翻译版(1)
相关软件: