usearoute-maptolimitredistributioninOSPF
添加时间: 2008-1-24 2:21:35 作者: Cisco指导 阅读次数:19 来源: http://www.d9soft.com
!
access-list 1 permit 172.16.10.0 0.0.1.255
!
!
! /* use access-list 1 to determine what gets matched */
!
route-map LoopbacksOnly permit 10
match ip address 1
!
!
! /* redistribute connected networks, any and all subnets, */
! /* and seed it as E2 type. Note that throughout your */
! /* OSPF domain, your loopbacks will have a metric of 20 */
! /* 20 is the default metric when you redistribute into */
! /* OSPF. Except for BGP routes which get a metric of 1. */
! /* Also use the route-map LoopbacksOnly to selectively */
! /* redistribute only the ones we want to redistribute. */
!
router ospf 200
redistribute connected subnets metric-type E2 route-map LooopbacksOnly
上下文章:
上一篇文章: 关于VLAN中DHCP域的问题 下一篇文章: 在Cisco2600上用RSVP架构高质量的VoIP方案
相关文章:
相关软件: