AS5300配置实例
添加时间: 2008-1-24 3:13:01 作者: Cisco指导 阅读次数:21 来源: http://www.d9soft.com
xx53a#sh run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname xx53a
!
aaa new-model
aaa authentication login default local
aaa authentication login xxlogin group radius
aaa authentication ppp default local
aaa authentication ppp xxdialin local group radius
enable secret 5 $1$VqVj$nAFgXleo5lie4JSC2td9X.
enable password 7 083645401D1615
!
username cisco password 7 03135205120031
username xxadmin password 7 110E03061F1705
username x126DDRcisco password 7 0611062F5841190D161443595F
username x226DDRcisco password 7 00131A0810541B121C221D1C5A
username x326DDRcisco password 7 0611062F5841190D161443595F
username x426DDRcisco password 7 095B47070D0A0706180F557878
username cisco26 password 7 02110D551F091F731A
spe 1/0 1/2
firmware location mica-modem-pw.2.6.2.0.bin
spe 1/3 1/9
firmware location system:/ucode/mica_port_firmware
spe 2/0 2/6
firmware location mica-modem-pw.2.6.2.0.bin
spe 2/7 2/9
firmware location system:/ucode/mica_port_firmware
!
!
resource-pool disable
!
!
!
!
!
modem answer delay 1
modem country mica china
ip subnet-zero
no ip domain-lookup
!
!
!
controller E1 0
framing NO-CRC4
clock source line primary
ds0-group 0 timeslots 1-15,17-30 type r2-digital r2-compelled
cas-custom 0
unused-abcd 0 1 1 1
country china
answer-signal group-b 1
dnis-digits min 1 max 7
!
controller E1 1
clock source line secondary 1
!
controller E1 2
clock source line secondary 2
!
controller E1 3
clock source line secondary 3
!
process-max-time 200
!
interface Loopback0
ip address 100.237.140.1 255.255.255.0
no ip directed-broadcast
!
interface Ethernet0
ip address 100.237.139.132 255.255.255.128
no ip directed-broadcast
no ip proxy-arp
!
interface Serial0
no ip address
no ip directed-broadcast
shutdown
no fair-queue
clockrate 2015232
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
no fair-queue
clockrate 2015232
!
interface Serial2
no ip address
no ip directed-broadcast
shutdown
no fair-queue
clockrate 2015232
!
interface Serial3
no ip address
no ip directed-broadcast
shutdown
no fair-queue
clockrate 2015232
!
interface FastEthernet0
ip address 100.237.139.28 255.255.255.128
ip access-group 10 out
no ip directed-broadcast
no ip proxy-arp
!
interface Group-Async0
physical-layer async
no ip address
no ip directed-broadcast
no group-range
!
interface Group-Async1
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer map ip 100.237.140.2 name x126DDRcisco
dialer map ip 100.237.140.3 name x226DDRcisco
dialer map ip 100.237.140.4 name x326DDRcisco
dialer map ip 100.237.140.5 name x426DDRcisco
dialer map ip 100.237.140.8 name cisco26
async default routing
async mode interactive
peer default ip address pool wt
no fair-queue
ppp authentication pap chap callin xxdialin
no ppp chap wait
group-range 1 120
!
ip local pool wt 100.237.140.32 100.237.140.95
no ip http server
ip classless
!
access-list 10 permit 100.237.139.252
access-list 20 permit 100.237.139.0 0.0.0.255
snmp-server engineID local 00000009020000024BA3A772
snmp-server community public RO
snmp-server community private RW
radius-server host 100.237.139.252 auth-port 1645 acct-port 1646
radius-server host 100.237.139.251 auth-port 1645 acct-port 1646
radius-server key radius
!
line con 0
transport input none
line 1 120
autoselect during-login
autoselect ppp
modem InOut
modem autoconfigure type mica
rotary 1
autocommand ppp
transport preferred pad telnet rlogin udptn
transport input all
transport output pad telnet rlogin udptn
autohangup
line aux 0
line vty 0 4
access-class 20 in
password 7 095B47070D0A07
!
end
上一篇文章: 思科IPCC解决方案介绍 下一篇文章: 使用过滤功能对路由器性能的影响