collectedfromBraindumps(2)
添加时间: 2007-9-3 22:21:33 作者: Cisco认证考试 阅读次数:42 来源: http://www.d9soft.com
There can be only one access list for in and one for out on each interface per protocol.
What is the FrameRelay configuration command for the second subinterface ?
interface s0.2 point-to-point
interface s0.2 multipoint
point-to-point is a direct link between two routers. multipoint is a router in the center as a star of virtual circuits.
How to change the Enable Secret password to CCNA ?
Router(config)# enable secret CCNA
How to change the Enable password to CCNP ?
Router(config)# enable password CCNP
How to change the Virtual Terminal password to CCIE ?
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password CCIE
How to change the Auxiliary password to Cisco ?
Router(config)# line aux 0
Router(config-line)# login
Router(config-line)# password Cisco
How to change the Console password to Cisco ?
Router(config)# line con 0
Router(config-line)# login
Router(config-line)# password Cisco
What is the command to show you both source and destination DLCI s in one command ?
I m thinking it is show frame-relay route but I m not sure.
What is the command to show both source and destination addresses in ipx ?
debug ipx routing activity (not sure)
How are the ISDN protocols defined ?
I stands for concepts, terminology and services
E stands for existing telephone network
Q stands for switching and signaling
What are the correct encapsulation type of frame-relay ?
Cisco (default)
IETF
How to monitor Frame-relay activity on a Cisco router ?
show interface s0
show frame-relay map
Test Stats:
Questions: 70
Pass Score: 68%
Simulations: None (That I had)
Adaptive: No
Time: 90 Minutes
My results:
Attempt one: 64%
Attempt two: 72%
Summary:
Anyone with a decent familiarity of networks (OSI Model) and has worked on a Cisco router should get this test as a freebee almost.
What three occurance reset the holddown timer after a trigger update?
What command copies a backup of the IOS image? copy running-config tftp albert
上一篇文章: collectedfromBraindumps(1) 下一篇文章: collectedfromBraindumps(3)
相关文章:
相关软件: